End of the road for me

This topic has 16 replies, 13 voices, and was last updated 14 May 2021 at 22:42 by Howard Lewis.

Viewing 17 posts - 1 through 17 (of 17 total)

Author

Posts
14 May 2021 at 16:18 #545024
Former Member
Participant
@formermember12892
[This posting has been removed]
Advert

14 May 2021 at 16:18 #28168
Former Member
Participant
@formermember12892
OLD CROC RETIRING
14 May 2021 at 16:38 #545032
Brian Baker 2
Participant
@brianbaker2
Sad to hear that Bill, good luck toyou in the future.

Regards

Brian B
14 May 2021 at 16:42 #545033
Former Member
Participant
@formermember12892
[This posting has been removed]
14 May 2021 at 16:45 #545035
Former Member
Participant
@formermember12892
[This posting has been removed]
14 May 2021 at 16:58 #545036
Brian H
Participant
@brianh50089
Very sorry to hear of your retirement Bill but I know what you mean about ailments and memory. I shall soldier on for a few more years hopefully.

All the best in whatever you do instead and you know where to come for any advice.

Brian
14 May 2021 at 17:33 #545044
Oldiron
Participant
@oldiron
Hi Bill. Sorry to hear that you have decided it is time to pack up the workshop. Sadly it comes to all of us at some time or another. Can I suggest that if you have any items left over after you sell the big items that you donate them to a local Mens Shed. They are always looking for more tools/materials/bits & pieces and will likely be able to help many that do not have their own workshops.

Best regards
14 May 2021 at 17:43 #545046
Former Member
Participant
@formermember12892
[This posting has been removed]
14 May 2021 at 17:56 #545049
Bazyle
Participant
@bazyle
I've been mentioning Men's Sheds for years – where have you been. Great place to have a cup of tea and a natter with like minded people. In many ways an ME club is the same. Not all sheds are able to sport a metal workshop as they tend to start off with woodworking as it is more accessible to more people however you will usually find that someof the Shed members do have metalworking experience or equipment of their own. As you put out feelers you suddenly find closet machinists all around you.

Another angle for retirees to consider is Meccano. Several of our members have found it enables them to keep messing about with metal after they have had to relinquish their equipment as it is compatible with sheltered husing if necessary.
14 May 2021 at 17:59 #545050
Ady1
Participant
@ady1
Sorry to hear that Bill, don't be a stranger, we're all mad in here anyway
14 May 2021 at 19:05 #545066
Jon Lawes
Participant
@jonlawes51698
Don't give up on the forum side just yet; the odd bit of conflict is the side effect of being able to communicate with so many people.

The Men's shed would be a great place for you to share your skills with novices even if you don't feel you can carry on doing the work yourself. I dearly miss my grandfathers engineering advice, someone nearby will surely be grateful for yours.
14 May 2021 at 19:06 #545067
larry phelan 1
Participant
@larryphelan1
Reading posts like this make me sad, We are all in the waiting room and wondering what to do with our gear.

The younger crowd dont want to know, too messy for them.

Must admit I never thought about Mens Sheds. I have much woodwork gear which should be of interest to them

Metal work equipment is not very big around these parts.

Sad to say, it comes to us all, so let us enjoy it while we can.

Keep your interest alive as long as you can Bill, what more can any of us do ?
14 May 2021 at 19:23 #545071
Grindstone Cowboy
Participant
@grindstonecowboy
Sad to read this Bill, I've never read any posts from you that I would consider to be upsetting.

All the best in whatever you do next.

Rob
14 May 2021 at 20:13 #545081
Michael Gilligan
Participant
@michaelgilligan61133
Arthritis is cruel, Bill

I’m perhaps not as debilitated as you, but everything I do takes more time and effort than it should.

Unless it pains you to do so though … Please do keep contributing to the forum !

MichaelG.
14 May 2021 at 21:25 #545091
Ian Skeldon 2
Participant
@ianskeldon2
My best wishes for whatever you decide to do in the Future Bill, I'm sure your contributions will be missed.
14 May 2021 at 22:15 #545098
martinjpayne1964
Participant
@martinjpayne1964
Bill,

It's sad to see anyone reach a point when they can no longer enjoy their chosen hobby, however, don't give up on the forum too soon: us youngsters (mid-50s) can still benefit from your knowledge.

I'm also interested in the Unimat 3 to replace my SL1000. Email sent.

Respectfully,

Martin.

Edited By Martin Payne on 14/05/2021 22:16:25
14 May 2021 at 22:42 #545102
Howard Lewis
Participant
@howardlewis46836
Sad news Bill.

The Men's Shed may be a good alternative. Probably you will be a big help to them.

Don't desert the Forum, you would be missed and your experience will be needed by newcomers who need advice and help

The problem is how to dispose of all the kit, when no one in the family has any interest.

My grandchildren will look at a lot of the stuff and wonder what it is and what it is for.

Howard
Author

Posts