I've got a manual, send me a pm with your email address and I'll send it along

I have a 350 for 25/30 years and have carried out lots of mods which George turner published in ME back in the 1980/90. I fitted a 3ph motor and inverter several years ago, plus home brew power table feed. If you send me a PM I'll forward the mods onto you. John

If you put Naerok in the search window just above your name at the top of the page you will find a manual there that you can save or down load. I found it handy as I have the same mill although here in New Zealand it is called Rexon, still made in Korea.

Ian S C

The reason for asking is that mine came fitted with an A32 and an A23 but these appeared too tight to select all speeds. On seeing this thread I ordered an A25 (the A25 size can also be confirmed from a picture on lathes.co.uk) but that seems too loose. Mine has had a replacement motor fitted so that may be cocking up the centres for the smaller belt so maybe I will try an A24