Naerok 350 mill

[dave le feuvreParticipant @davelefeuvre20236]

I am refurbishing a naerok 350 but need a manual and the belt sizes, I think there may be some belt tensioning bits missing. Help please

[dave le feuvreParticipant @davelefeuvre20236]

manual and or drivebelt sizes.

[duncan webster 1Participant @duncanwebster1]

I've got a manual, send me a pm with your email address and I'll send it along

[Martin Hamilton 1Participant @martinhamilton1]

The 2 v belts on my Naerok 350 mill are marked A32 & A25, these are easy available belts.

[john fletcher 1Participant @johnfletcher1]

I have a 350 for 25/30 years and have carried out lots of mods which George turner published in ME back in the 1980/90. I fitted a 3ph motor and inverter several years ago, plus home brew power table feed. If you send me a PM I'll forward the mods onto you. John

[LynneParticipant @lynne]

John, I have sent you a PM. Lynne

[Ian S CParticipant @iansc]

If you put Naerok in the search window just above your name at the top of the page you will find a manual there that you can save or down load. I found it handy as I have the same mill although here in New Zealand it is called Rexon, still made in Korea.

Ian S C

[Craig BrownParticipant @craigbrown60096]

Sorry to drag this thread back up but no sense in starting a new one. Would someone be able to confirm the belt sizes for the Naerok RDM350?

Many thanks, Craig

[Craig BrownParticipant @craigbrown60096]

The reason for asking is that mine came fitted with an A32 and an A23 but these appeared too tight to select all speeds. On seeing this thread I ordered an A25 (the A25 size can also be confirmed from a picture on lathes.co.uk) but that seems too loose. Mine has had a replacement motor fitted so that may be cocking up the centres for the smaller belt so maybe I will try an A24

[john halfpennyParticipant @johnhalfpenny52803]

I use newish A31 and A23. Its difficult at the extremes, but you will soon have enough variety to suit all combinations.

[Author]

Posts