Exeter gets new carriage shed

Exeter gets new carriage shed

This topic has 7 replies, 6 voices, and was last updated 16 June 2021 at 18:06 by old mart.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
15 June 2021 at 23:24 #549975
Bazyle
Participant
@bazyle
Exeter and District MES carriage shed was delivered. Now that's a long load on a short trailer.
hope the facebook link works,
**LINK**
Advert

15 June 2021 at 23:24 #28223
Bazyle
Participant
@bazyle
EDMES
16 June 2021 at 07:07 #549984
not done it yet
Participant
@notdoneityet
hope the facebook link works,

It will not. Never do.
16 June 2021 at 11:31 #550024
Bazyle
Participant
@bazyle
If the facebook link doesn't work search for Exeter and District model Engineers to see the video.

Around 9 30 a lorry reversed down the lane with a 40 foot long container on board. The container was lifted over the wall and the lorry and trailer returned to Heathfield. Some 90 minutes later the lorry reappeared with a smaller trailer which was able to negoitiate the priory entrance. The container was then lifted onto the trailer. We had to remove some rail track and lay scaffold boards over the bed to minimise damage. The lorry trailor and container weighing in at 30 tons. Three slabs were broken, but were quickly replaced after the lorry had left. The driver then positioned his lorry and carefully place the container onto the piers we had put down.
16 June 2021 at 12:07 #550026
Oldiron
Participant
@oldiron
Link works fine for me. The shed will be a good asset for the club. I like the Steam Bike further down the page.

regards

Edited By Oldiron on 16/06/2021 12:07:56
16 June 2021 at 14:46 #550046
roy entwistle
Participant
@royentwistle24699
The link worked for me. I also like the steam bike
16 June 2021 at 16:38 #550057
Steviegtr
Participant
@steviegtr
Posted by roy entwistle on 16/06/2021 14:46:27:

The link worked for me. I also like the steam bike

I was talking to the guy & his other half at Squires cafe steam fair last weekend. Lovely thing. Never seen one before.

Steve.
16 June 2021 at 18:06 #550067
old mart
Participant
@oldmart
Exeter St Davids has a new one also, somewhat bigger.
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Is anyone interested in developping a new series of model engines?
  Started by: [email protected] in: General Questions
- 3
- 4
- 19 July 2026 at 21:16
  Baz
- Gents C7 electric master clock
  Started by: Robert Atkinson 2 in: Clocks and Scientific Instruments
- 5
- 9
- 19 July 2026 at 20:28
  duncan webster 1
- Steam Loco component interconnection diagram
  Started by: Trevor Wood 6 in: Beginners questions
- 5
- 7
- 19 July 2026 at 17:39
  Charles Lamont
- Interactive article on Beam Engines
  Started by: glinscott in: Stationary engines
- 5
- 14
- 19 July 2026 at 17:05
  Ches Green UK
- Help please! Workshop clearance 1 2
  Started by: ksw in: General Questions
- 12
- 27
- 19 July 2026 at 16:35
  Speedy Builder5
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 42
- 147
- 19 July 2026 at 15:48
  Speedy Builder5
- Honing cylinder
  Started by: Speedy Builder5 in: Workshop Techniques
- 5
- 9
- 19 July 2026 at 13:12
  Roderick Jenkins
- Mechanical lubrication steam locos. Non return valve opening pressure
  Started by: peter allen 1 in: General Questions
- 5
- 5
- 19 July 2026 at 12:54
  noel shelley
- Face Drive Pins
  Started by: Michael Gilligan in: Materials
- 4
- 5
- 19 July 2026 at 10:37
  renardiere7
- Bridgeport Series 1 CNC 1 2 3
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 62
- 19 July 2026 at 02:22
  seemack
- New comer
  Started by: vgvikram171 in: Introduce Yourself – New members start here!
- 1
- 1
- 18 July 2026 at 20:43
  vgvikram171
- Fixturing conundrum with Hemingway die filer kit
  Started by: timdotd in: Workshop Techniques
- 6
- 11
- 18 July 2026 at 18:52
  timdotd
- Use of insert type lathe tools 1 2
  Started by: JA in: Workshop Tools and Tooling
- 16
- 27
- 18 July 2026 at 18:39
  JA
- Help ID’ing Round Carbide Insert and Finding a Supplier 1 2
  Started by: Jon Gibbs in: Workshop Tools and Tooling
- 10
- 36
- 18 July 2026 at 18:07
  renardiere7
- Plug in Solar 1 2 3 4
  Started by: Vic in: The Tea Room
- 26
- 81
- 18 July 2026 at 17:03
  Macolm
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 2
- 12
- 18 July 2026 at 16:56
  Steve101
- Links for Workshop and Model Engineering STLs and other files.
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 10
- 14
- 18 July 2026 at 16:29
  Mark Rand
- Pipe Size Puzzle.
  Started by: Nigel Graham 2 in: Locomotives
- 6
- 12
- 18 July 2026 at 14:52
  Zan
- Nut screws washer and bolts – you know the old joke
  Started by: Kiwi Bloke in: General Questions
- 13
- 19
- 18 July 2026 at 14:47
  duncan webster 1
- Myford VMC Spindle Advice Please. 1 2 3
  Started by: Nigel Graham 2 in: Manual machine tools
- 12
- 59
- 18 July 2026 at 11:59
  Graham Meek
- Small 3D Metal Printed Part
  Started by: Julie Ann in: 3D Printers and 3D Printing
- 1
- 1
- 18 July 2026 at 11:43
  Julie Ann
- QCTP 1 2
  Started by: James A in: Workshop Tools and Tooling
- 20
- 36
- 18 July 2026 at 09:12
  James A
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 30
- 17 July 2026 at 21:58
  SteveP
- Very Low Q
  Started by: duncan webster 1 in: Clocks and Scientific Instruments
- 2
- 2
- 17 July 2026 at 18:39
  John Haine
- How Good Are 3D Printers? 1 2
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 19
- 43
- 17 July 2026 at 17:17
  Roderick Jenkins

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies