The world of model and hobby engineering

Subscribe
The Modelling Hub Logo

The world of model and hobby engineering

Subscribe
Buy Latest Issue

Forums

Help

Register

Log in

Reproducing graphics on a dark surface

Advert
New Replies
Report Bug
Help/FAQs

Reproducing graphics on a dark surface

Home › Forums › General Questions › Reproducing graphics on a dark surface

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 3 November 2013 at 10:47 #22929
    JasonB
    Moderator
      @jasonb
      3 November 2013 at 10:47 #134497
      JasonB
      Moderator
        @jasonb

        Can I pick your brains.

        I am currently finishing off a hit & miss engine which is painted red and I need to add some yellow writing to the side. The casting kit includes some naff stickers which I'd rather not use so am looking for other options.

        I have tried the print yourself waterslide transfers but the yellow is too weak when printed on clear and I don't want to have to cut out individual letters if I use the white version.

        There is a kit for making dry transfers much like letraset that are said to work on a dark background, has anyone tried this method or can suggest something else, I don't want to use vinyl as it sticks up.

        Thanks, J

        3 November 2013 at 11:00 #134498
        Cornish Jack
        Participant
          @cornishjack

          Jason

          Sticky labels?? When I was into aero-modelling, we used to make quite complex transfers from standard luggage sticky labels. Apply the design to the glue side of the label, spray a thin coat of polyurethane (or similar) varnish. Allow to dry. When ready to apply to the model, use like waterslide transfers – float on water surface until the paper backing has loosened, handle with fine paintbrush or similar, apply and allow to dry.

          There may be better alternatives nowadays.

          Rgds

          Bill

          3 November 2013 at 11:31 #134502
          jason udall
          Participant
            @jasonudall57142

            I think wolfie has a solution to this…but the reverse print on paper label. .sounds intresting..
            I once coated film with pva to provide print surface. .peels off with luck. .print loads yield is low…

            3 November 2013 at 13:08 #134509
            JasonB
            Moderator
              @jasonb

              The problem is the printer ink is not opaque enough to work on a dark surface, the clear film you buy to print on works fine on a light surface but the ones I printed in yellow and tried to lay onto red were all but invisible. Black onto brass works OK, this is 3/4" dia

              imag1688.jpg

              The one I linked to above bonds the pigment to a white base coat which is opaque and blocks out the colour below

              3 November 2013 at 14:41 #134518
              Sub Mandrel
              Participant
                @submandrel

                Yellow inkjet ink relies on the white paper reflecting light back up through it for its brightness. If you could get a silk screen made up and print white and then yellow on top you could get a decent result.

                Neil

              • Author
                Posts
              Viewing 6 posts - 1 through 6 (of 6 total)
              • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

              Latest Replies
              Report Bug
              Code of Conduct
              Help & FAQs
              Advert

              Latest Replies

              Home › Forums › General Questions › Topics

              Viewing 25 topics - 1 through 25 (of 25 total)
              Viewing 25 topics - 1 through 25 (of 25 total)

              View full reply list.

              Advert

              Latest Issue

              Subscribe
              Buy Latest/Back Issues

              Newsletter Sign-up

              Latest Replies