Lathe is running great again

[Jim Dalton 1Participant @jimdalton1]

Hi all

Just to say thanks for the advice from forum members. My SC2 mini lathe belt had stripped. After a replacement arrived from Arc Eurotrade ( who were really helpful), all is fine again. I also stripped down the cross slide/compound etc, oiled everything up, adjusted the gibs and and runs very smoothly and rigidly now, and cuts AL like a knife through butter!!

Thanks again

[Jim Dalton 1Participant @jimdalton1]

After belt damage and a full strip down

[old martParticipant @oldmart]

Good to hear the news, and another browney point for Arc.

[Author]

Posts