Polycraft Polyfoam Rigid 145

This topic has 2 replies, 2 voices, and was last updated 16 January 2025 at 23:20 by Michael Gilligan.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
7 December 2024 at 02:16 #769147
Michael Gilligan
Participant
@michaelgilligan61133
Does any ‘participant’ have actual experience of using this specific product ?

https://www.mbfg.co.uk/polycraft-polyfoam-rigid-145.html

.

If so, I have a question for you … which the supplier was unable to answer.

If not, please ignore this post.

Thanks

MichaelG
Advert

16 January 2025 at 22:28 #777804
Chris Trice
Participant
@christrice43267
It also goes by the name of Biscuit Foam should you want to seek an alternative supplier. Warm the mould and the resin and mix by shaking although the latter is not essential.

https://www.mouldlife.net/procell-rf9–1119-p.asp
16 January 2025 at 23:20 #777828
Michael Gilligan
Participant
@michaelgilligan61133
Thanks for that, Chris

… I have already purchased the material, but not yet had the opportunity to use it.

There is some serious planning required before I risk using it, because there will probably only be one chance to get it right.

MichaelG.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2 3
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 54
- 27 August 2026 at 00:36
  David Frith
- Photography in the workshop (for the inept)
  Started by: Pippin in: Workshop Techniques
- 9
- 13
- 26 August 2026 at 23:36
  Paul Lousick
- I built another one …
  Started by: Mick B1 in: Work In Progress and completed items
- 2
- 2
- 26 August 2026 at 23:29
  bernard towers
- Cutting 25 thou grooves for a couple of circlips
  Started by: Andrew Tinsley in: General Questions
- 9
- 20
- 26 August 2026 at 21:17
  Andrew Tinsley
- Taper turning attachment
  Started by: Bernard Reilly in: Workshop Tools and Tooling
- 6
- 8
- 26 August 2026 at 20:56
  Clive Foster
- Toolroom Takeover 2026
  Started by: Pippin in: The Tea Room
- 2
- 2
- 26 August 2026 at 20:40
  Michael Gilligan
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 3
- 4
- 26 August 2026 at 19:32
  Mick B1
- Ketan Swali 1 2 3
  Started by: Bill Davies 2 in: The Tea Room
- 44
- 51
- 26 August 2026 at 18:55
  Bill Dawes
- Flywheel material
  Started by: Speedy Builder5 in: Materials
- 12
- 19
- 26 August 2026 at 18:16
  JasonB
- Chronos closing down. 1 2 3 4
  Started by: Andrew Tinsley in: General Questions
- 35
- 80
- 26 August 2026 at 18:04
  Roderick Jenkins
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 3
- 7
- 26 August 2026 at 16:44
  JasonB
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 21
- 26 August 2026 at 16:10
  Derek Drover
- Scam response to advert
  Started by: Lee Rogers in: The Tea Room
- 2
- 2
- 26 August 2026 at 16:04
  Derek Drover
- Parting off 1 2
  Started by: Peter Simpson 3 in: Beginners questions
- 19
- 42
- 26 August 2026 at 12:50
  Howard Lewis
- Reconstruction of dimensions fom a photo…
  Started by: Robin Graham in: Beginners questions
- 5
- 6
- 26 August 2026 at 11:27
  Michael Gilligan
- Plug in Solar 1 2 3 4
  Started by: Vic in: The Tea Room
- 30
- 97
- 26 August 2026 at 10:47
  bernard towers
- Survival Challenge TV for engineers!
  Started by: Neil Wyatt in: The Tea Room
- 14
- 23
- 26 August 2026 at 10:21
  noel shelley
- Drill grinders/sharpeners and their capabilities
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 9
- 20
- 26 August 2026 at 09:32
  Pippin
- Nameplate Identification
  Started by: onarion67 in: Workshop Techniques
- 4
- 8
- 25 August 2026 at 19:07
  Martin Johnson 1
- Honing cylinder
  Started by: Speedy Builder5 in: Workshop Techniques
- 6
- 11
- 25 August 2026 at 17:15
  Speedy Builder5
- Annealing extruded acrylic
  Started by: Mick Bailey in: Materials
- 1
- 1
- 25 August 2026 at 09:49
  Mick Bailey
- Myford Lathe Identification
  Started by: Captain Barnacles in: Manual machine tools
- 8
- 14
- 25 August 2026 at 08:40
  Howard Lewis
- All things Beaver Mill 1 2 … 9 10
  Started by: Robert James 3 in: Manual machine tools
- 43
- 238
- 25 August 2026 at 05:37
  Lex Davis
- Modifying the OKMO P51 Friction Clutch for a Model Steam Engine
  Started by: Blue Heeler in: Work In Progress and completed items
- 1
- 1
- 25 August 2026 at 01:20
  Blue Heeler
- What parting off tool and how to get parallel faces?
  Started by: interferencefit in: Beginners questions
- 14
- 20
- 24 August 2026 at 17:31
  old mart

Polycraft Polyfoam Rigid 145

Polycraft Polyfoam Rigid 145

Latest Replies

Latest Issue

September 2026

Newsletter Sign-up

Latest Replies