Tramming and quill lock Warco WM18 / Grizzly 0708

This topic has 1 reply, 1 voice, and was last updated 9 January 2022 at 09:34 by mark chandler.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
9 January 2022 at 09:34 #579371
mark chandler
Participant
@markchandler81131
HI, I have a Warco WM18 mill, similar to the Grizzly 0704. When tramming up the head I find the quill lock tilts the spindle by about .001". In the past I'm sure I saw a modification for the quill lock that overcomes this but all I can find is spindle locks which are a different thing.

Tramming the head without the using the quill lock but with different extensions using the fine feed results in consistent readings. I could tram the head with the quill locked but this gives different readings depending on how tight the lock is.

Any suggestions please?
Advert

9 January 2022 at 09:34 #33946
mark chandler
Participant
@markchandler81131
Spindle tilt when using quill lock
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Hot radiators in summer
  Started by: Gary Wooding in: The Tea Room
- 7
- 8
- 23 June 2026 at 12:13
  JasonB
- Advice required
  Started by: janet.ho001 in: Introduce Yourself – New members start here!
- 1
- 1
- 23 June 2026 at 12:10
  janet.ho001
- Taylor Hobson Pantograph Engraver Model D 1 2
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 10
- 41
- 23 June 2026 at 11:15
  jaCK Hobson
- Running 380V 3-phase motor on 230V 1-phase 1 2
  Started by: jimalm in: Electronics in the Workshop
- 14
- 31
- 23 June 2026 at 11:01
  Julie Ann
- Rob Roy Build
  Started by: Dalboy in: Locomotives
- 4
- 15
- 22 June 2026 at 21:24
  Dalboy
- Help identifying a mystery thread
  Started by: Beardy Mike in: Beginners questions
- 8
- 15
- 22 June 2026 at 19:04
  Nicholas Farr
- Rapidor Manchester re-build
  Started by: homecat88 in: Introduce Yourself – New members start here!
- 2
- 3
- 22 June 2026 at 17:47
  homecat88
- Orbital – Not your Usual Oscillator!
  Started by: JasonB in: Stationary engines
- 14
- 21
- 22 June 2026 at 17:36
  Howard Lewis
- Gas Tap Valves. Vintage 1 2
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 17
- 48
- 22 June 2026 at 17:25
  Howard Lewis
- Unwanted Car Software Update
  Started by: Chris Crew in: The Tea Room
- 12
- 16
- 22 June 2026 at 16:48
  paul1956
- Oiling Lathe Ways
  Started by: Blue Heeler in: Beginners questions
- 7
- 8
- 22 June 2026 at 13:34
  Bazyle
- Farm Boy dimensions
  Started by: Speedy Builder5 in: Stationary engines
- 3
- 4
- 22 June 2026 at 13:02
  JasonB
- Nickel Silver
  Started by: Carl in: Materials
- 10
- 15
- 22 June 2026 at 11:52
  Roderick Jenkins
- Flame Licker Engine & USA made 1930’s Empire Water Pump
  Started by: Blue Heeler in: Miscellaneous models
- 2
- 2
- 22 June 2026 at 10:03
  Bazyle
- Film Projectors/Astronomy/Radio Ham-Mark Stuckey
  Started by: Mark Easingwood in: Related Hobbies including Vehicle Restoration
- 1
- 1
- 21 June 2026 at 22:40
  Mark Easingwood
- Baffled by flatted-shank spot weld drills
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 4
- 8
- 21 June 2026 at 22:26
  Bill Phinn
- Wallace valvegear simulator 1 2
  Started by: Kevan Shaw in: General Questions
- 7
- 27
- 21 June 2026 at 21:32
  Kevan Shaw
- All things Beaver Mill 1 2 … 9 10
  Started by: Robert James 3 in: Manual machine tools
- 43
- 229
- 21 June 2026 at 21:16
  Mark Rand
- Green Dragon Sustainable Fuel
  Started by: Neil Wyatt in: Locomotives
- 14
- 24
- 21 June 2026 at 21:07
  Mark Rand
- Is improvement work on this forum/website still ongoing? 1 2 … 5 6
  Started by: Ian P in: Website Questions, Comments, and Suggestions
- 38
- 140
- 21 June 2026 at 19:59
  bernard towers
- Emco Compact 5 milling table restoration
  Started by: rikt in: Manual machine tools
- 5
- 9
- 21 June 2026 at 15:39
  Eric Lucas
- Firehole door for 5inch gauge
  Started by: Perko7 in: Locomotives
- 3
- 3
- 21 June 2026 at 15:22
  Weary
- New Toy Day
  Started by: Julie Ann in: Workshop Tools and Tooling
- 10
- 15
- 21 June 2026 at 15:10
  old mart
- Greetings
  Started by: dee in: Introduce Yourself – New members start here!
- 7
- 10
- 21 June 2026 at 13:53
  dobbs57
- Comm Ads
  Started by: bernard towers in: Website Questions, Comments, and Suggestions
- 4
- 18
- 21 June 2026 at 09:06
  Charles Lamont

Tramming and quill lock Warco WM18 / Grizzly 0708

Tramming and quill lock Warco WM18 / Grizzly 0708

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies