D 13 chuck backplate stud fitting not camlock

This topic has 6 replies, 2 voices, and was last updated 31 December 2016 at 08:22 by richard perrin.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
30 December 2016 at 14:55 #274460
richard perrin
Participant
@richardperrin87256
Hi, Trying to find a supplier of Di3 Backplate for Myford 254s lathe, it has the stud fitting not camlock, the ones that I have looked at Warco etc seem to have a very shallow register. I want to fit a 4 jaw ind chuck, failing that maybe a 4 jaw with D13 fitting. any help would be appreciated.

Regards Richard
Advert

30 December 2016 at 14:55 #32861
richard perrin
Participant
@richardperrin87256
30 December 2016 at 16:35 #274484
Old School
Participant
@oldschool
Richard. I have used the warco D13 backplates on my 254s you just have to make the studs. I use cap head bolts with a plain shank and thread it M10x1 to fit the backplate use a good die to cut the thread the bolts are tough. The register in the warco and a cast iron back plates I have used is correct.
30 December 2016 at 18:21 #274511
richard perrin
Participant
@richardperrin87256
Thank you Old School, I will try one from Warco, what do you use for lubrication in the headstock / gearbox?

Many Thanks. Richard
30 December 2016 at 19:06 #274526
Old School
Participant
@oldschool
I use Machine/slide way oil 68 from Arceurotrade
30 December 2016 at 19:38 #274533
Old School
Participant
@oldschool
Forgot to say also use this oil in the saddle and the bed etc.
31 December 2016 at 08:22 #274578
richard perrin
Participant
@richardperrin87256
Thank you again Old School, Regards Richard
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Running 380V 3-phase motor on 230V 1-phase 1 2
  Started by: jimalm in: Electronics in the Workshop
- 14
- 28
- 22 June 2026 at 22:58
  SillyOldDuffer
- Taylor Hobson Pantograph Engraver Model D 1 2
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 10
- 39
- 22 June 2026 at 22:12
  Charles Jambon
- Rob Roy Build
  Started by: Dalboy in: Locomotives
- 4
- 15
- 22 June 2026 at 21:24
  Dalboy
- Help identifying a mystery thread
  Started by: Beardy Mike in: Beginners questions
- 8
- 15
- 22 June 2026 at 19:04
  Nicholas Farr
- Rapidor Manchester re-build
  Started by: homecat88 in: Introduce Yourself – New members start here!
- 2
- 3
- 22 June 2026 at 17:47
  homecat88
- Orbital – Not your Usual Oscillator!
  Started by: JasonB in: Stationary engines
- 14
- 21
- 22 June 2026 at 17:36
  Howard Lewis
- Gas Tap Valves. Vintage 1 2
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 17
- 48
- 22 June 2026 at 17:25
  Howard Lewis
- Unwanted Car Software Update
  Started by: Chris Crew in: The Tea Room
- 12
- 16
- 22 June 2026 at 16:48
  paul1956
- Oiling Lathe Ways
  Started by: Blue Heeler in: Beginners questions
- 7
- 8
- 22 June 2026 at 13:34
  Bazyle
- Farm Boy dimensions
  Started by: Speedy Builder5 in: Stationary engines
- 3
- 4
- 22 June 2026 at 13:02
  JasonB
- Nickel Silver
  Started by: Carl in: Materials
- 10
- 15
- 22 June 2026 at 11:52
  Roderick Jenkins
- Flame Licker Engine & USA made 1930’s Empire Water Pump
  Started by: Blue Heeler in: Miscellaneous models
- 2
- 2
- 22 June 2026 at 10:03
  Bazyle
- Film Projectors/Astronomy/Radio Ham-Mark Stuckey
  Started by: Mark Easingwood in: Related Hobbies including Vehicle Restoration
- 1
- 1
- 21 June 2026 at 22:40
  Mark Easingwood
- Baffled by flatted-shank spot weld drills
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 4
- 8
- 21 June 2026 at 22:26
  Bill Phinn
- Wallace valvegear simulator 1 2
  Started by: Kevan Shaw in: General Questions
- 7
- 27
- 21 June 2026 at 21:32
  Kevan Shaw
- All things Beaver Mill 1 2 … 9 10
  Started by: Robert James 3 in: Manual machine tools
- 43
- 229
- 21 June 2026 at 21:16
  Mark Rand
- Green Dragon Sustainable Fuel
  Started by: Neil Wyatt in: Locomotives
- 14
- 24
- 21 June 2026 at 21:07
  Mark Rand
- Is improvement work on this forum/website still ongoing? 1 2 … 5 6
  Started by: Ian P in: Website Questions, Comments, and Suggestions
- 38
- 140
- 21 June 2026 at 19:59
  bernard towers
- Emco Compact 5 milling table restoration
  Started by: rikt in: Manual machine tools
- 5
- 9
- 21 June 2026 at 15:39
  Eric Lucas
- Firehole door for 5inch gauge
  Started by: Perko7 in: Locomotives
- 3
- 3
- 21 June 2026 at 15:22
  Weary
- New Toy Day
  Started by: Julie Ann in: Workshop Tools and Tooling
- 10
- 15
- 21 June 2026 at 15:10
  old mart
- Greetings
  Started by: dee in: Introduce Yourself – New members start here!
- 7
- 10
- 21 June 2026 at 13:53
  dobbs57
- Comm Ads
  Started by: bernard towers in: Website Questions, Comments, and Suggestions
- 4
- 18
- 21 June 2026 at 09:06
  Charles Lamont
- Renewing AA cover.
  Started by: Grizzly bear in: The Tea Room
- 13
- 14
- 20 June 2026 at 23:48
  howardb
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2 3
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 52
- 20 June 2026 at 22:20
  David Frith

D 13 chuck backplate stud fitting not camlock

D 13 chuck backplate stud fitting not camlock

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies