Machine specs aluminum plates

This topic has 7 replies, 5 voices, and was last updated 10 December 2019 at 20:43 by Neil Wyatt.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
10 December 2019 at 11:40 #441020
Massimo Dalmonte
Participant
@massimodalmonte45801
Good afternoon ,
I always wondered how the black and "white" aluminum plates found on various appliances (specs on electric motors, speed charts on lathes, etc) are manufactured.
I think it involves a silkscreening process, but I don't know how the black part is obtained (it' doesn't look to be a paint, more some black oxide, as it is tightly adhering to the underlying metal, with no discernable thickness).
If somebody knows more about the process, I would be happy to learn something new.

Massimo

Edited By Massimo Dalmonte on 10/12/2019 11:41:42
Advert

10 December 2019 at 11:40 #27003
Massimo Dalmonte
Participant
@massimodalmonte45801
10 December 2019 at 12:55 #441026
Brian G
Participant
@briang
Take a look at http://www.gsmgraphicarts.com/ Massimo, the manufacturers appear to offer several different methods.

Brian G

Edit: I just learnt (nearly 40 years too late) that the instrument manufacturer I used to work for had the wrong description on its drawings, and that the round head rivets that secure nameplates should be called drive screws, not drive rivets.

Edited By Brian G on 10/12/2019 12:58:14
10 December 2019 at 13:12 #441030
Martin Kyte
Participant
@martinkyte99762
It can be done like this.

Laser Engraving

skip to 3/4 of the way through if you dont want the layout process.

regards Martin
10 December 2019 at 14:46 #441046
old mart
Participant
@oldmart
The coloured aluminium plates are produced by first anodising the plates. This is a protective surface which is porous, a bit like an open honeycomb on a microscopic scale. Selected parts are masked off, usually by photographic resist or silk screening. The part is then put in a bath of hot dye which soaks into the bare areas. The resist/silk screen ink is washed off and another part is left bare for more dye of a different colour. This can be done several times. An example is used on the speed control levers on older Colchester lathes.

**LINK**
10 December 2019 at 14:59 #441052
Massimo Dalmonte
Participant
@massimodalmonte45801
Thanks everybody,
so the plates I was referring to are dyed anodized aluminum (always thought of color anodizing as covering the whole object and not only some parts of it…); it almost seem I could replicate this at home, using the same photoresist film used for pcb, though there is surely a learning curve to get decent results.

Massimo
10 December 2019 at 18:07 #441083
old mart
Participant
@oldmart
Here's a link: **LINK**
10 December 2019 at 20:43 #441109
Neil Wyatt
Moderator
@neilwyatt
Posted by Massimo Dalmonte on 10/12/2019 14:59:17:

Thanks everybody,
so the plates I was referring to are dyed anodized aluminum (always thought of color anodizing as covering the whole object and not only some parts of it…); it almost seem I could replicate this at home, using the same photoresist film used for pcb, though there is surely a learning curve to get decent results.

Massimo

It can be done, but my own efforts were 'inconclusive'.

Neil
Author

Posts