Warco Lathe Query

[Conroy StarkParticipant @conroystark]

Today i sent a message to Warco asking about a machine they recently sold and included the serial number. The answer from Steve was "I have no information about this ***** Best regards, Steve.

 

Edited By Neil Wyatt on 16/02/2021 16:19:27

[Conroy StarkParticipant @conroystark]

Warco

[Rik ShawParticipant @rikshaw]

Its very quiet in here for a new thread

[roy entwistleParticipant @royentwistle24699]

Rik

 

Roy

Edited By roy entwistle on 15/02/2021 15:46:18

[Former MemberParticipant @formermember12892]

[This posting has been removed]

[Harry WilkesParticipant @harrywilkes58467]

Looks like lockdown is getting to someone

H

[Brian GParticipant @briang]

I HATE cryptic crosswords, but think I have got this one. Nonsense could mean scrambled, in which case this thread is about Acrow props.

Brian G

[Former MemberParticipant @formermember12892]

[This posting has been removed]

[Bo’sunParticipant @bosun58570]

I know this lockdown is getting to everybody, but have I missed something?

[Jeff DaymanParticipant @jeffdayman43397]

Maybe moderators blew Mr Stark's barge clean out of the water with a broadside of all the 16 in guns……….

[Former MemberParticipant @formermember12892]

[This posting has been removed]

[mark costello 1Participant @markcostello1]

16" guns are a favorite, just pointed the other direction.

[Grindstone CowboyParticipant @grindstonecowboy]

Could be a relative of Tony Stark AKA IronMan portrayed here by Robert Downey Jr.- well, he IS an engineer…

Or there's a chap in Bristol of that name.

I'm as confused as the rest of you really.

Rob

[Bo’sunParticipant @bosun58570]

Still none the wiser.

[BazyleParticipant @bazyle]

A couple months ago I blocked someone's posts. Never done it before but I can't remember who and why and can't see anything on the controls that tell me. What happens if someone you block starts a thread? does it come up like this with the first post missing?

[Dave HalfordParticipant @davehalford22513]

Posted by Bazyle on 16/02/2021 09:18:59:

A couple months ago I blocked someone's posts. Never done it before but I can't remember who and why and can't see anything on the controls that tell me. What happens if someone you block starts a thread? does it come up like this with the first post missing?

Yep first post I see is Rik's and you can't un-ignore member either.

[Gray62Participant @gray62]

Posted by Dave Halford on 16/02/2021 09:23:01:

Posted by Bazyle on 16/02/2021 09:18:59:

A couple months ago I blocked someone's posts. Never done it before but I can't remember who and why and can't see anything on the controls that tell me. What happens if someone you block starts a thread? does it come up like this with the first post missing?

Yep first post I see is Rik's and you can't un-ignore member either.

You can see who you are ignoring by going to 'My posts' in the top green bar and click on ' My Ignored Members' at the top of that page, I don't know but think that may then allow you to un-ignore, can't be sure as I don't have anyone in my list. As with a lot of this forum, not the most obvious or intuitive place to put that list!

Gray

Edited By Gray on 16/02/2021 09:51:25

[JasonBModerator @jasonb]

The reason is one of the other moderators has been active, I'll leave them to deal with it.

[Michael GilliganParticipant @michaelgilligan61133]

Posted by Bazyle on 16/02/2021 09:18:59:

A couple months ago I blocked someone's posts. Never done it before but I can't remember who and why and can't see anything on the controls that tell me. What happens if someone you block starts a thread? does it come up like this with the first post missing?

.

If you log-out, and then look at the forum anonymously; you should see the posts from your ignored member.

But, of course, if it was me that you blocked … you may not be seeing this

MichaelG.

[Dave HalfordParticipant @davehalford22513]

Posted by Gray on 16/02/2021 09:50:47:

Posted by Dave Halford on 16/02/2021 09:23:01:

Posted by Bazyle on 16/02/2021 09:18:59:

A couple months ago I blocked someone's posts. Never done it before but I can't remember who and why and can't see anything on the controls that tell me. What happens if someone you block starts a thread? does it come up like this with the first post missing?

Yep first post I see is Rik's and you can't un-ignore member either.

You can see who you are ignoring by going to 'My posts' in the top green bar and click on ' My Ignored Members' at the top of that page, I don't know but think that may then allow you to un-ignore, can't be sure as I don't have anyone in my list. As with a lot of this forum, not the most obvious or intuitive place to put that list!

Gray

Edited By Gray on 16/02/2021 09:51:25

Cheers Gray, I missed that.

[not done it yetParticipant @notdoneityet]

Unless this thread was from someone ‘ignored’ by most of the forum regular responders, that is not the reason for non viewing. I suspect it was a spam posting that was removed but leaving a gap of sorts.

Edited to add:

Jason said – I'll leave them to deal with it

Give him(?) a break, sort it for them and avoid their embarrassment.🙂

Edited By not done it yet on 16/02/2021 10:21:57

[Former MemberParticipant @formermember12892]

[This posting has been removed]

[Rik ShawParticipant @rikshaw]

"Looks like lockdown is getting to someone"

That could apply to a lot of us when you consider how much interest has been has generated by absolutely s*d all.

Rik (dribbling)

[David ColwillParticipant @davidcolwill19261]

This could be one of those weird advertising campaigns.

Once everyone has finished talking about this there will be another post.

"Warco more sense"

Another pause until it is revealed that Warco have released a new lathe that can sense exactly what you need and cracks on with it!

David.

[Anonymous]

Posted by Michael Gilligan on 16/02/2021 09:58:25:

But, of course, if it was me that you blocked … you may not be seeing this

Did you say something, Michael?

[Author]

Posts