Woodruff keys

[mickParticipant @mick65121]

Does anyone know where I can get hold of a couple of 404 Woodruff keys

[mickParticipant @mick65121]

[Tony Pratt 1Participant @tonypratt1]

tbwfasteners on Ebay.

Tony

[roy entwistleParticipant @royentwistle24699]

Who on earth buys woodruff keys ?

[Tony Pratt 1Participant @tonypratt1]

Please don't tell me you make them?

[JasonBModerator @jasonb]

Posted by roy entwistle on 27/04/2015 18:12:06:

Who on earth buys woodruff keys ?

The bloke that dropped his and can't find it.

[Oompa LumpaParticipant @oompalumpa34302]

Posted by roy entwistle on 27/04/2015 18:12:06:

Who on earth buys woodruff keys ?

There are two clear sides to this comment and I see both quite clearly. If you are retired or at least a model engineer (or any sort of maker/doer) I can see the sense in someone wanting to make one. Even if it is just to experience this.

On the other side of the coin, I just would not have the time or inclination, I would pull the box out marked "Woodruff Keys" and select one, modifying it if need be. Anyone trying to earn a crust just doesn't have the time.

There is a third option – you are on a breakdown and you can either wait for the shops to open tomorrow or actually get paid for making one, that works for me too. I have done more than my share of all nighters. And a couple of All Weekenders too.

graham.

[John Stevenson 1Participant @johnstevenson1]

Certainly not me.

Anything comes in for repair with a woodruff keyway in goes out with a flat key fitted.

Absolutely hate the bloody things. What engineer in his right mind came up with a flawed design that called for an extra deep keyway with sharp corners often going deeper than 1/2 the shaft diameter ??

Seen far, far to many shaft that have peeled open from the bottom of a woodruff keyway.

[RainbowsParticipant @rainbows]

I believe this ebay has 31 of them.

Am I right in saying 404 is 1/8" thick, 1/2" wide and has a height just under 13/64"?

[Steamer1915Participant @steamer1915]

Mick,

PM sent.

Steve.

[mickParticipant @mick65121]

Thanks Steve. All I wanted was a key to replace the one I lost when I removed the spindle on my Myford, not start WW 3!!!!

[Gordon WParticipant @gordonw]

At risk of boring everyone- Woodruff keys are not meant for driving loads, they are for location, eg. timing gear. Easiest way to make them is find a bolt of correct dia. and saw a slice off, then file to size.

[Author]

Posts