Unusual Dies

Unusual Dies

Home Forums General Questions Unusual Dies

Viewing 6 posts - 26 through 31 (of 31 total)
  • Author
    Posts
  • #115706
    Mark C
    Participant
      @markc

      Gordon, that depends on the make! I have a Marshal & Rose upright that I have carried with a mate but we could only just about walk with it after two more big lads helped pick it up and then we needed help to put it back down after going through a corridor.

      Mark

      #115735
      Gordon W
      Participant
        @gordonw

        Mark, well mine was an iron framed one, but it was a long time ago when I was fitter than I am now. Loaded onto a trailer and towed 200 miles behind a 2CV. A bit off topic I suppose.

        #115738
        Sub Mandrel
        Participant
          @submandrel

          Off topic, yes, but useful replies.

          It's an ordinary upright so we should be OK. It's not been tuned for a few years so knocking it about a bit won't do any harm

          Thanks folks.

          Neil

          #115741
          Nicholas Farr
          Participant
            @nicholasfarr14254

            Hi Neil, my younger brother and myself moved a couple, lifted them onto a transit truck, but that was 15-20 year ago when I was just into my 40's something. It is doable with two, but easyer with three.

            Regards Nick.

            #230323
            John Harwood
            Participant
              @johnharwood63555

              Back to the subject… I got one of these dies in a job lot, exactly the same as the die on the left of the picture, except that somebody had scratched "3/32 W" on the face.

              Indeed, a 3/32" Whitworth screw will run into it, so the thread has 48TPI, but I'm not sure about the thread form. It seems to rub at the top of the threads.

              Maybe a 48TPI with a 60 degree thread form.

              #230362
              Michael Gilligan
              Participant
                @michaelgilligan61133
                Posted by John Harwood on 16/03/2016 19:41:10:

                Back to the subject… I got one of these dies in a job lot, exactly the same as the die on the left of the picture, except that somebody had scratched "3/32 W" on the face.

                Indeed, a 3/32" Whitworth screw will run into it, so the thread has 48TPI, but I'm not sure about the thread form. It seems to rub at the top of the threads.

                Maybe a 48TPI with a 60 degree thread form.

                .

                Assuming that your check and this page are both correct … That means they are not for bicycle spokes, which are 56tpi regardless of gauge.

                Edit: But this says otherwise !!

                MichaelG.

                 

                Edited By Michael Gilligan on 16/03/2016 22:56:30

              Viewing 6 posts - 26 through 31 (of 31 total)
              • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

              Latest Replies

              Home Forums General Questions Topics

              Viewing 25 topics - 1 through 25 (of 25 total)
              Viewing 25 topics - 1 through 25 (of 25 total)

              View full reply list.