Threaded ball nosed cutter

[Eric CoxParticipant @ericcox50497]

I've been trying to find a threaded shank ball nosed cutter. All the ones I can find are plain shank for fitting into a collet. Any one know a supplier for threaded shank cutters.

[Eric CoxParticipant @ericcox50497]

[Capstan SpeakingParticipant @capstanspeaking95294]

Warco, Chronos or proper engineers' suppliers such as Cromwell or MSC Direct. Google is your friend

[Neil LickfoldParticipant @neillickfold44316]

You can cut the threaded end off an old cutter, and then get a plain shank cutter and hold it into the Clarkson type holder. Works very well. There is also a very big range of the ball nose cutter geometries available in the plain shank tools.

Neil

[Author]

Posts