New guy, Myford help

[Piero FranchiParticipant @pierofranchi37209]

Hi There

First of, a big ello to you guys,

My first topic of many I hope.

I was lucky enough to have bought my first ever lathe, A myford super 7 Mk1

thhe old girl was in a very horrible state, only as it was covered in sworth and had been over painted a couple of times,

Having done a total nut and bold strip down, and having inspected the lathe for wear, I think I have been lucky as its extreamly good, with little or no wear.

I have been a classic car buff most of my life and am lucky to own a nice warm workshop with lots of helpful tools,

a parts bath and a blasting cabinet have been no end of use to my little myford.

I have made plates to cover any ways, or exposed metal i did not want blasted, plugged threads with old bolts etc etc and have made a start on rebuilding my super 7 (see pics attached)

I have got so far as the cabinet, the drip tray, the bed its self, the headstock, the brook crompton motor and the tail stock.

Three things I would like help with plz.

I am after a couple of raising blocks, so if any one has a genuine set he or she does not need, plz pm me, cash waiting for a good set with there bolts etc.

or were would be the best place to by the after market ones ??? are they any good????

second question, with the head stock apart, its probably worth me changing the head stock V belt, who sells the best quality as I don't want to be replacing it again .

last question is with regards to a grub screw.

please see first photo, the size is written next to it, were does this go????

[Piero FranchiParticipant @pierofranchi37209]

[KWILParticipant @kwil]

 

E

Edited By KWIL on 05/03/2016 17:15:21

[KWILParticipant @kwil]

For raising blocks

**LINK**

Photos, where ?

[Michael GilliganParticipant @michaelgilligan61133]

Piero,

Reference KWIL's 'question'

You may find it useful to read this:

**LINK**

MichaelG.

[Les Jones 1Participant @lesjones1]

I think this was the link that KWIL intended to post. The link posted had #SID=408 appended to the URL.

Les.

[NJHParticipant @njh]

Hi Piero

I would forget the renewal of the V belt and use a link belt instead. These work well and if you need to replace a belt in the future no dismantling is required.

Here is an example on my S7 – this is the drive from the motor not the one you refer to but the same belting applies. ( My headstock belt is still OK at present but will be replaced with the link type when the time comes!)

Norman

[egaParticipant @ega]

Piero Franchi:

When Tubal Cain wasn't breaking other people's taps he gave us an excellent design for shop-made raising blocks. I could post a photo if you are not committed to the Myford item and fancy saving a bit of money by making your own (you would probably need a working lathe).

[Piero FranchiParticipant @pierofranchi37209]

don,t know what happened to my photos,

can anyone advise how I add them

[Piero FranchiParticipant @pierofranchi37209]

ok, thanks for the link on how to up load photos,

so starting with the grubscrew

http://s850.photobucket.com/user/Urge_photos/media/20160303_131637_zpsenhovy1x.jpg.html?o=4

 

http://s850.photobucket.com/user/Urge_photos/media/20151016_113932_zpspceq6ovr.jpg.html?o=2

 

http://s850.photobucket.com/user/Urge_photos/media/20151016_113909_zpsy5gseiov.jpg.html?o=3

 

http://s850.photobucket.com/user/Urge_photos/media/20160304_161420_zps55ermjhe.jpg.html?o=1

 

http://s850.photobucket.com/user/Urge_photos/media/20160304_161329_zpsbvcb9o5o.jpg.html?o=0

[Author]

Posts