Link belt fitting

This topic has 4 replies, 2 voices, and was last updated 28 November 2013 at 17:49 by Mike Teaman.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
28 November 2013 at 16:56 #136604
Mike Teaman
Participant
@miketeaman64279
Which is the correct way round for fitting a link belt? Points of links towards direction of rotation or t'other way?

Mike
Advert

28 November 2013 at 16:56 #17228
Mike Teaman
Participant
@miketeaman64279
Correct way round
28 November 2013 at 17:11 #136606
Gone Away
Participant
@goneaway
Don't they have direction arrows on them …. every 10th link or so?
28 November 2013 at 17:45 #136608
Mike Teaman
Participant
@miketeaman64279
I'll have a shufty. Thanks.

Mike
28 November 2013 at 17:49 #136610
Mike Teaman
Participant
@miketeaman64279
I've just found this:-

LINK

Thank you

Mike
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Doobells
  Started by: Michael Gilligan in: The Tea Room
- 1
- 1
- 20 September 2026 at 06:56
  Michael Gilligan
- Mini lathes I need to look into
  Started by: mcenhillk in: Manual machine tools
- 14
- 17
- 20 September 2026 at 06:44
  Chris Crew
- End mill sharpening 1 2
  Started by: petro1head in: General Questions
- 16
- 32
- 19 September 2026 at 23:30
  Nigel Graham 2
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 332
- 19 September 2026 at 19:24
  Phil Whitley
- Arc closure and popularity of Chineese lathes
  Started by: File Handle in: The Tea Room
- 3
- 4
- 19 September 2026 at 18:02
  File Handle
- … I had hoped we were growing-out of this nonsense ! 1 2
  Started by: Michael Gilligan in: The Tea Room
- 21
- 28
- 19 September 2026 at 17:37
  Howard Lewis
- Octopus Heat Pump 1 2 3 4
  Started by: Michael Gilligan in: The Tea Room
- 25
- 88
- 19 September 2026 at 16:30
  Macolm
- New Myford 7 DRO article
  Started by: Bob Worsley in: Electronics in the Workshop
- 7
- 20
- 19 September 2026 at 14:09
  Michael Gilligan
- Suzanne
  Started by: Steve Huckins in: Work In Progress and completed items
- 4
- 6
- 19 September 2026 at 14:06
  Dalboy
- Drive coil ampere turns for seconds pendulum 1 2
  Started by: carlw in: Clocks and Scientific Instruments
- 6
- 28
- 19 September 2026 at 12:16
  John Haine
- Machining inserts part numbers
  Started by: JA in: Workshop Tools and Tooling
- 6
- 8
- 19 September 2026 at 10:15
  JA
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 8
- 12
- 18 September 2026 at 22:41
  Kiwi Bloke
- Maxcut 5 – Arc Euro Trade
  Started by: Phil S in: Workshop Tools and Tooling
- 2
- 2
- 18 September 2026 at 22:32
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 48
- 184
- 18 September 2026 at 20:26
  Neil Wyatt
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 4
- 15
- 18 September 2026 at 19:28
  JasonB
- Tom Thumb Toolpost Grinder
  Started by: Phil P in: Workshop Tools and Tooling
- 2
- 2
- 18 September 2026 at 15:30
  John Haine
- Sherline closing down
  Started by: Peter Cook 6 in: Manual machine tools
- 8
- 20
- 18 September 2026 at 13:04
  Peter Cook 6
- Model Engineer & Workshop 1 2
  Started by: Tony Watson 3 in: Model Engineer & Workshop
- 18
- 31
- 18 September 2026 at 12:55
  Neil Wyatt
- Building a 4″ traction engine
  Started by: Karl Tear in: Traction engines
- 11
- 24
- 18 September 2026 at 11:41
  Nigel Graham 2
- Su251-53 1 2
  Started by: parovoz in: Locomotives
- 14
- 28
- 18 September 2026 at 07:10
  Dave Wootton
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 7
- 17 September 2026 at 20:55
  sean logie
- Have I got 12-28 UNF wrong or has Völkel? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 12
- 30
- 17 September 2026 at 19:12
  peak4
- pendulum support springs
  Started by: gerry madden in: Clocks and Scientific Instruments
- 6
- 9
- 17 September 2026 at 18:54
  John Haine
- Thread info required for the TEMU hydraulic pressure tester
  Started by: Greensands in: General Questions
- 10
- 17
- 17 September 2026 at 18:28
  duncan webster 1
- CLarke C430 lathe threading
  Started by: tatler in: Help and Assistance! (Offered or Wanted)
- 6
- 8
- 17 September 2026 at 18:19
  Howard Lewis

Link belt fitting

Link belt fitting

Latest Replies

Latest Issue

October 2026

Newsletter Sign-up

Latest Replies