Steel prices post lockdown

This topic has 2 replies, 1 voice, and was last updated 4 November 2021 at 13:35 by Ian Parkin.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
4 November 2021 at 13:21 #569775
Ian Parkin
Participant
@ianparkin39383
I just called in my friendly steel stockholders today to restock my mild steel and after i had loaded it all in my car was shocked that since the last time perhaps 2 years ago the price had increased from 1000£ Tonne to 2400£ Tonne

this batch was £360

Edited By Ian Parkin on 04/11/2021 13:25:34
Advert

4 November 2021 at 13:21 #36616
Ian Parkin
Participant
@ianparkin39383
4 November 2021 at 13:35 #569779
Ian Parkin
Participant
@ianparkin39383
Just checked one of my bits was 71 plus vat

at aluminium warehouse who i do use a lot for alloy their price for the same length in 40mm in BDMS is £184 plus vat

so my stockholder is still cheap
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Making curved parts
  Started by: Steve Huckins in: Beginners questions
- 3
- 6
- 14 September 2026 at 08:47
  Steve Huckins
- Have I got 12-28 UNF wrong or has Völkel?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 7
- 10
- 14 September 2026 at 08:39
  JasonB
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 47
- 182
- 14 September 2026 at 08:27
  JasonB
- Drive coil ampere turns for seconds pendulum
  Started by: carlw in: Clocks and Scientific Instruments
- 3
- 7
- 14 September 2026 at 03:24
  carlw
- Quorn Belt Guard
  Started by: John Purdy in: 3D Printers and 3D Printing
- 4
- 4
- 13 September 2026 at 23:29
  noel shelley
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 5
- 13 September 2026 at 22:09
  Bazyle
- LG Smart TVs
  Started by: Michael Gilligan in: The Tea Room
- 11
- 14
- 13 September 2026 at 18:12
  Michael Gilligan
- Source of milling cutters post Arceurotradw
  Started by: Mike Crossfield in: Workshop Tools and Tooling
- 9
- 11
- 13 September 2026 at 13:55
  jimmy b
- Seig sx2p mill
  Started by: BOB BLACKSHAW 1 in: Manual machine tools
- 3
- 8
- 13 September 2026 at 13:12
  Ches Green UK
- Octopus Heat Pump 1 2
  Started by: Michael Gilligan in: The Tea Room
- 17
- 44
- 13 September 2026 at 13:07
  Martin Johnson 1
- Wilson Slant Bed Lathe
  Started by: JC54 in: Manual machine tools
- 7
- 16
- 13 September 2026 at 11:44
  odubhain82
- Question about GHT’s retracting topslide drawing 1 2
  Started by: ega in: Workshop Tools and Tooling
- 9
- 27
- 13 September 2026 at 10:49
  Alan Jackson
- Steam Traction World in administration
  Started by: Baldric in: The Tea Room
- 13
- 21
- 12 September 2026 at 21:28
  Nigel Graham 2
- Model Engineer & Workshop 1 2
  Started by: Tony Watson 3 in: Model Engineer & Workshop
- 18
- 30
- 12 September 2026 at 20:44
  duncan webster 1
- Oilstones / Waterstones
  Started by: Grindstone Cowboy in: General Questions
- 7
- 14
- 12 September 2026 at 16:57
  Grindstone Cowboy
- Parting off 1 2 3
  Started by: Peter Simpson 3 in: Beginners questions
- 22
- 51
- 12 September 2026 at 16:49
  Mick B1
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 331
- 12 September 2026 at 15:17
  Phil Whitley
- End mill sharpening
  Started by: petro1head in: General Questions
- 13
- 21
- 12 September 2026 at 13:02
  Martin Johnson 1
- Inappropriate adverts on the site
  Started by: Joseph Noci 1 in: Website Questions, Comments, and Suggestions
- 16
- 23
- 12 September 2026 at 12:28
  bernard towers
- How much !?! 1 2
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 17
- 29
- 12 September 2026 at 08:36
  bernard towers
- Collet Identification Please?
  Started by: Nigel Graham 2 in: Manual machine tools
- 5
- 8
- 11 September 2026 at 21:29
  Michael Gilligan
- Preview of whats coming in Freecad 26.3
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 2
- 6
- 11 September 2026 at 20:13
  Russell Eberhardt
- Claude et al
  Started by: Michael Gilligan in: The Tea Room
- 3
- 3
- 11 September 2026 at 10:46
  Fulmen
- WARNING: Phishing Attempt on MMEE Bookings?
  Started by: Nigel Graham 2 in: Exhibitions, Shows and Club Events
- 2
- 2
- 11 September 2026 at 09:13
  Meridienne Exhibitions 1
- Inserting An Angled Feature (Alibre Atom) 1 2
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 4
- 32
- 10 September 2026 at 11:13
  Nigel Graham 2

Steel prices post lockdown

Steel prices post lockdown

Latest Replies

Latest Issue

September 2026

Newsletter Sign-up

Latest Replies