Looking for ‘the bomb in the workshop’

This topic has 11 replies, 9 voices, and was last updated 22 February 2021 at 19:10 by Gerhard Novak.

Viewing 12 posts - 1 through 12 (of 12 total)

Author

Posts
22 February 2021 at 15:40 #529367
Georgineer
Participant
@georgineer
I recently followed a thread called, as I recall, "The Bomb in the Workshop" about exploding air receivers, and I'm sure it was on this forum.

I've tried all the search methods I can think of on this forum (and on others that I frequent) and can't find any trace of it.

Did it exist, where has it gone, where can I find it? Or have I really lost the thread, and the plot with it?

Ploys holp muy!

George B.
Advert

22 February 2021 at 15:40 #27987
Georgineer
Participant
@georgineer
I’ve lost the thread
22 February 2021 at 15:52 #529369
JasonB
Moderator
@jasonb
Bomb comes up when you search for it on home page
22 February 2021 at 15:54 #529371
AndrewD
Participant
@andrewd
Link

It was retitled to make it easier to find. But only if you spell compressor with three esses.
22 February 2021 at 16:07 #529373
Georgineer
Participant
@georgineer
Posted by JasonB on 22/02/2021 15:52:09:

Bomb comes up when you search for it on home page

Curiously, when I searched for 'bomb' all I got was tallboys and nuclears.

And Andrew, for some reason I didn't think of using three Ss in compresssor.

Thanks, both.

George B.
22 February 2021 at 16:14 #529375
Neil Wyatt
Moderator
@neilwyatt
Posted by AndrewD on 22/02/2021 15:54:07:

Link

It was retitled to make it easier to find. But only if you spell compressor with three esses.

I surprised that didn't blow up sooner!

Corrected now.

It was more that the original title wouldn't necessarily attract the attention of compressor owners who ought to see it.

Neil
22 February 2021 at 17:01 #529386
Rik Shaw
Participant
@rikshaw
Its been some weeks since the "bomb" thread put the wind up me. Today was the first day that I've turned my compresssor on since I read that thread but before it got anywhere near full I left it going, vacated the workshop and legged it back down to the house (Anderson shelter). Five minutes later and with the roof on the workshop still intact I ventured back. I will continue thus for the conceivable.

Rik

Edited By Rik Shaw on 22/02/2021 17:06:46
22 February 2021 at 17:49 #529393
Oldiron
Participant
@oldiron
Its more likely that you will blow the workshop up with the 1/2 gallon of Acetone or all the other explosives we keep "handy" in the same room we do our welding & grinding in etc. I have Parrafin, Acetone, many pints/litres of thinner, paint , spare gas canisters for the blow lamp in my workshop. All at one end away from the welders but still a chance I might dissapear into space on a mushroom cloud one day.

regards
22 February 2021 at 18:01 #529397
Georgineer
Participant
@georgineer
Posted by Oldiron on 22/02/2021 17:49:10:

…but still a chance I might dissapear into space on a mushroom cloud one day.

We'll be able to tell which way your ultimate destination lies, by whether the smoke is white or black.

George B.
22 February 2021 at 18:19 #529399
noel shelley
Participant
@noelshelley55608
For those worried about this and wanting to try and minimise the risk, whilst not a PROPER test one can conduct ones own annual hydraulic test and at about £80 one can get a small ultrasonic thickness measuring device that will indicate the corrosion loss of thickness. This is not going to be an approved test but will at least give some indication of the state of the air receiver ! Noel
22 February 2021 at 18:59 #529403
not done it yet
Participant
@notdoneityet
I put ‘compressor’ in the search box and, hey-ho, there it was.
22 February 2021 at 19:10 #529406
Gerhard Novak
Participant
@gerhardnovak66893
Well my good old compressor, bought in Italy years ago after some travellers (I would say ch***ys but this is not political correct here) emptied my garage and took my lovely 50l tank 2HP compressor – so yes my good old comressor has a safety valve, and as on a steam boiler from time to time you should check if it is still free or stuck. So chances to explode from this side are rather limited. Other than that I have 2 gallons of model aircraft fuel – one with 5% nitromethan (4 stroke plane), one with 15% nitromethan (2 stroke heli) in my shed, which are much more to worry about…
Author

Posts