Warco Lathe Query

This topic has 45 replies, 26 voices, and was last updated 18 February 2021 at 17:41 by SillyOldDuffer.

Viewing 25 posts - 1 through 25 (of 46 total)

1 2 →

Author

Posts
15 February 2021 at 14:48 #527488
Conroy Stark
Participant
@conroystark
Today i sent a message to Warco asking about a machine they recently sold and included the serial number. The answer from Steve was "I have no information about this ***** Best regards, Steve.

Edited By Neil Wyatt on 16/02/2021 16:19:27
Advert

15 February 2021 at 14:48 #27975
Conroy Stark
Participant
@conroystark
Warco
15 February 2021 at 15:32 #527496
Rik Shaw
Participant
@rikshaw
Its very quiet in here for a new thread
15 February 2021 at 15:45 #527508
roy entwistle
Participant
@royentwistle24699
Rik

Roy

Edited By roy entwistle on 15/02/2021 15:46:18
15 February 2021 at 16:32 #527520
Former Member
Participant
@formermember12892
[This posting has been removed]
15 February 2021 at 16:35 #527521
Harry Wilkes
Participant
@harrywilkes58467
Looks like lockdown is getting to someone

H
15 February 2021 at 16:45 #527527
Brian G
Participant
@briang
I HATE cryptic crosswords, but think I have got this one. Nonsense could mean scrambled, in which case this thread is about Acrow props.

Brian G
15 February 2021 at 17:06 #527535
Former Member
Participant
@formermember12892
[This posting has been removed]
15 February 2021 at 17:14 #527539
Bo’sun
Participant
@bosun58570
I know this lockdown is getting to everybody, but have I missed something?
15 February 2021 at 17:34 #527544
Jeff Dayman
Participant
@jeffdayman43397
Maybe moderators blew Mr Stark's barge clean out of the water with a broadside of all the 16 in guns……….
15 February 2021 at 18:00 #527554
Former Member
Participant
@formermember12892
[This posting has been removed]
15 February 2021 at 18:33 #527561
mark costello 1
Participant
@markcostello1
16" guns are a favorite, just pointed the other direction.
15 February 2021 at 18:51 #527564
Grindstone Cowboy
Participant
@grindstonecowboy
Could be a relative of Tony Stark AKA IronMan portrayed here by Robert Downey Jr.- well, he IS an engineer…

Or there's a chap in Bristol of that name.

I'm as confused as the rest of you really.

Rob
16 February 2021 at 09:14 #527658
Bo’sun
Participant
@bosun58570
Still none the wiser.
16 February 2021 at 09:18 #527660
Bazyle
Participant
@bazyle
A couple months ago I blocked someone's posts. Never done it before but I can't remember who and why and can't see anything on the controls that tell me. What happens if someone you block starts a thread? does it come up like this with the first post missing?
16 February 2021 at 09:23 #527662
Dave Halford
Participant
@davehalford22513
Posted by Bazyle on 16/02/2021 09:18:59:

A couple months ago I blocked someone's posts. Never done it before but I can't remember who and why and can't see anything on the controls that tell me. What happens if someone you block starts a thread? does it come up like this with the first post missing?

Yep first post I see is Rik's and you can't un-ignore member either.
16 February 2021 at 09:50 #527670
Gray62
Participant
@gray62
Posted by Dave Halford on 16/02/2021 09:23:01:

Posted by Bazyle on 16/02/2021 09:18:59:

A couple months ago I blocked someone's posts. Never done it before but I can't remember who and why and can't see anything on the controls that tell me. What happens if someone you block starts a thread? does it come up like this with the first post missing?

Yep first post I see is Rik's and you can't un-ignore member either.

You can see who you are ignoring by going to 'My posts' in the top green bar and click on ' My Ignored Members' at the top of that page, I don't know but think that may then allow you to un-ignore, can't be sure as I don't have anyone in my list. As with a lot of this forum, not the most obvious or intuitive place to put that list!

Gray

Edited By Gray on 16/02/2021 09:51:25
16 February 2021 at 09:57 #527672
JasonB
Moderator
@jasonb
The reason is one of the other moderators has been active, I'll leave them to deal with it.
16 February 2021 at 09:58 #527673
Michael Gilligan
Participant
@michaelgilligan61133
Posted by Bazyle on 16/02/2021 09:18:59:

A couple months ago I blocked someone's posts. Never done it before but I can't remember who and why and can't see anything on the controls that tell me. What happens if someone you block starts a thread? does it come up like this with the first post missing?

.

If you log-out, and then look at the forum anonymously; you should see the posts from your ignored member.

But, of course, if it was me that you blocked … you may not be seeing this

MichaelG.
16 February 2021 at 09:59 #527674
Dave Halford
Participant
@davehalford22513
Posted by Gray on 16/02/2021 09:50:47:

Posted by Dave Halford on 16/02/2021 09:23:01:

Posted by Bazyle on 16/02/2021 09:18:59:

A couple months ago I blocked someone's posts. Never done it before but I can't remember who and why and can't see anything on the controls that tell me. What happens if someone you block starts a thread? does it come up like this with the first post missing?

Yep first post I see is Rik's and you can't un-ignore member either.

You can see who you are ignoring by going to 'My posts' in the top green bar and click on ' My Ignored Members' at the top of that page, I don't know but think that may then allow you to un-ignore, can't be sure as I don't have anyone in my list. As with a lot of this forum, not the most obvious or intuitive place to put that list!

Gray

Edited By Gray on 16/02/2021 09:51:25

Cheers Gray, I missed that.
16 February 2021 at 10:15 #527679
not done it yet
Participant
@notdoneityet
Unless this thread was from someone ‘ignored’ by most of the forum regular responders, that is not the reason for non viewing. I suspect it was a spam posting that was removed but leaving a gap of sorts.

Edited to add:

Jason said – I'll leave them to deal with it

Give him(?) a break, sort it for them and avoid their embarrassment.🙂

Edited By not done it yet on 16/02/2021 10:21:57
16 February 2021 at 10:16 #527680
Former Member
Participant
@formermember12892
[This posting has been removed]
16 February 2021 at 11:03 #527693
Rik Shaw
Participant
@rikshaw
"Looks like lockdown is getting to someone"

That could apply to a lot of us when you consider how much interest has been has generated by absolutely s*d all.

Rik (dribbling)
16 February 2021 at 11:12 #527694
David Colwill
Participant
@davidcolwill19261
This could be one of those weird advertising campaigns.

Once everyone has finished talking about this there will be another post.

"Warco more sense"

Another pause until it is revealed that Warco have released a new lathe that can sense exactly what you need and cracks on with it!

David.
16 February 2021 at 15:40 #527764
Anonymous
Posted by Michael Gilligan on 16/02/2021 09:58:25:

But, of course, if it was me that you blocked … you may not be seeing this

Did you say something, Michael?
Author

Posts