More Info

This topic has 25 replies, 16 voices, and was last updated 21 March 2015 at 08:16 by Ian S C.

Viewing 25 posts - 1 through 25 (of 26 total)

1 2 →

Author

Posts
19 March 2015 at 08:52 #183712
Harry Wilkes
Participant
@harrywilkes58467
Hi Guy's a friend picked this up a would like a little info on it, can anyone throw some light on it please.

Cheers H
Advert

19 March 2015 at 08:52 #23777
Harry Wilkes
Participant
@harrywilkes58467
19 March 2015 at 08:59 #183713
Les Jones 1
Participant
@lesjones1
Hi Harry,
It looks like a centrifugal water pump to me. I have no idea of the manufacturer.

Les.
19 March 2015 at 09:00 #183714
roy entwistle
Participant
@royentwistle24699
It looks like a centrefugal pump Stuart Turner perhaps

Edited By roy entwistle on 19/03/2015 09:04:25
19 March 2015 at 09:02 #183715
Nick_G
Participant
@nick_g
.

Looks to me as if it's some kind of centrifugal water or other liquid circulating pump.

What it's originally intended for I can unfortunately be of no help to you with.

Nick
19 March 2015 at 09:04 #183716
Nick_G
Participant
@nick_g
.

Next time the 'circ pump' on your central heating goes you could replace it with that.

Nick
19 March 2015 at 09:05 #183717
JasonB
Moderator
@jasonb
Centrifugal pump but its not a Stuart one as the feet were not part of the main pump body
19 March 2015 at 09:05 #183718
Michael Gilligan
Participant
@michaelgilligan61133
Harry,

Centrifugal Pump … Looks too nicely made to be commercial, so Stuart Turner or similar origin seems likely.

These notes may be of interest.

MichaelG.

.

Edit: just seen Jason's reply …

Edited By Michael Gilligan on 19/03/2015 09:07:24
19 March 2015 at 09:23 #183721
Ian S C
Participant
@iansc
Harry, what size is it?

Ian S C
19 March 2015 at 20:53 #183817
Harry Wilkes
Participant
@harrywilkes58467
Thanks to all for the replies and Ian I'll get some dimensions

Cheers H
19 March 2015 at 21:34 #183821
Ian P
Participant
@ianp
Harry

What colour is the one that you want identifying?

Ian P
19 March 2015 at 22:55 #183831
Johnboy25
Participant
@johnboy25
It's a Stuart centrifugal pump as shown in my 1940 – 1941 Stuart model catalogue. Page 36. I've always been under the impression that WW2 was gripping Europe. Did Stuart help with the war effort? Just a thought.

However… I've taken a pickie but don't know how to insert it with the text? I'm sure someone will tell me or point me to the right thread! Still – I've just come back from an evening out with my 'last of the summer wine' pals and the alcohol doesn't help!

John
19 March 2015 at 23:10 #183834
Johnboy25
Participant
@johnboy25
19 March 2015 at 23:11 #183835
Johnboy25
Participant
@johnboy25
Done it!
20 March 2015 at 01:27 #183841
Nicholas Farr
Participant
@nicholasfarr14254
Hi, same type of pump as shown by Johnboy25, but a different design. In Harry's picture, it is possible to strip down the pump leaving all the pipework intact and the bearings can be worked on, on the bench, and the outlet is opposite hand. With the Stuart design you would have to at least disturb the inlet pipework to get to the impeller to clean out debris or remove the bearings for maintenance. They will both do much the same job though.

I've worked on much larger ones of both types and the one in Harry's picture are much more easy to work on. I do realise these are only small, but if you don't have to disturb the pipework, so much the better.

Regards Nick.

Edited By Nicholas Farr on 20/03/2015 01:29:36
20 March 2015 at 07:53 #183856
JasonB
Moderator
@jasonb
Looks like Stuarts may have changed the design at some time, this is the one from my 80s catalogue which has a different foot and flange mounting for the outlet, they do call it teh No 2 pump so could Harrys be a No 1?
20 March 2015 at 08:01 #183857
John Olsen
Participant
@johnolsen79199
Stuart did indeed help with the war effort. They made a little steam powered generating set that was used to power clandestine radios. I would also expect that like most manufacturing plants, they would have been going flat out at making whatever was needed that fitted their capabilities.

Apart from that, I believe that at one time they were making quite a lot of pumps in the full size world. I think they divested the model side at some point, or maybe vice versa.

John
20 March 2015 at 08:04 #183859
Harry Wilkes
Participant
@harrywilkes58467
Many thanks to all for replies and info.

Cheers H
20 March 2015 at 08:06 #183861
Michael Gilligan
Participant
@michaelgilligan61133
Some useful images on this thread.

MichaelG.

.

P.S. … Nice 'Timeline' here, with a great picture at 1906

Edited By Michael Gilligan on 20/03/2015 08:12:39
20 March 2015 at 09:16 #183872
Gordon W
Participant
@gordonw
I've always assumed that Stuarts models was the same co. as the Stuart who made full size pumps, maybe not. I have a Stuart piston water pump, used on my well. the parts list shows an extra was a sleeve and piston to convert to a boiler pump, about 1" dia.
20 March 2015 at 09:25 #183873
IanT
Participant
@iant
I think they were Gordon – I seem to remember seeing both pumps and casting kits in their shop window when they were still based in Henley-on-Thames.

Regards,

IanT
20 March 2015 at 09:36 #183875
V8Eng
Participant
@v8eng
Stuart turner have a very long and interesting history in Henley, making: model engines, pumps and even motorcycles.

I've put a link here to their history.

**LINK**

Edited By V8Eng on 20/03/2015 09:39:01
20 March 2015 at 16:49 #183922
Harry Wilkes
Participant
@harrywilkes58467
Posted by V8Eng on 20/03/2015 09:36:50:

Stuart turner have a very long and interesting history in Henley, making: model engines, pumps and even motorcycles.

I've put a link here to their history.

**LINK**

Edited By V8Eng on 20/03/2015 09:39:01
20 March 2015 at 17:18 #183924
DMB
Participant
@dmb
IIRC, Model Engineer ran a short article or 2 on the subject of a small vertical steam boiler powered generating set for the use of agents transmitting clandestine radio messages back to the UK during the war.

John
20 March 2015 at 18:51 #183927
Neil Wyatt
Moderator
@neilwyatt
I recall the set was designed by Ian Bradley, and used a Stuart Sirus.

Neil
Author

Posts