Mini Lathe

[Godfrey Duggan 1Participant @godfreyduggan1]

Metalworker

[Godfrey Duggan 1Participant @godfreyduggan1]

Hi

I require electrical repair on Mini lathe. It Has what sounds like a relay chatter. The number on the board is FC250J/230V. Any help is appreciated.

regards

Godfrey

[OldironParticipant @oldiron]

Sorry cannot help with the repair but if you Google Clarke cl300 and look in images scroll down and there is a schematic and a circuit for the board. There are a few video's on Youtube about the board as well.

Good luck with the repair regards

[Howard LewisParticipant @howardlewis46836]

If you want spares, it might be worth contacting Arc Euro. They may be able supply quicker than Machine Mart.

I am sure that Ketan and Ian will be as helpful as possible.

Based on my experience of my local M M branch, and a friend's requirement for spares for a larger machine, they may not be the most clued up source!

Howard

[Nick Clarke 3Participant @nickclarke3]

Posted by Howard Lewis on 09/10/2020 10:35:23:

Based on my experience of my local M M branch, and a friend's requirement for spares for a larger machine, they may not be the most clued up source!

Howard

While I have always had excellent service from Arc, if you ring the Machine Mart spares helpline they know what they are doing when the local branches may not.

[An OtherParticipant @another21905]

Godfrey – PM sent.

[Author]

Posts