Have a look at this, view from the chuck

[CarlParticipant @carl48656]

**LINK**

[CarlParticipant @carl48656]

[BazParticipant @baz89810]

Greatly unimpressed!

[Ian Skeldon 2Participant @ianskeldon2]

I wish I had that much time on my hands, is there going to be a follow up ? View from the tailstock maybe?

[John HaineParticipant @johnhaine32865]

Just because you can, doesn't mean you should!

[not done it yetParticipant @notdoneityet]

Could’ve done it all in one go with a variable speed lathe. I’m in the Baz camp.

[noel shelleyParticipant @noelshelley55608]

WHAT CAN ONE SAY—– THAT HASN'T ALREADY BEEN SAID !!!!!

[John ReeseParticipant @johnreese12848]

Gave me vertigo.

[John ReeseParticipant @johnreese12848]

The camera lens was eccentric as was its owner.

[DiogenesIIParticipant @diogenesii]

I want to see "From the Ram of My Shaper at Full Travel"..

[J HancockParticipant @jhancock95746]

I thought I was getting out of bed again.

[John MCParticipant @johnmc39344]

Probably just trying to justify spending a small fortune on a Go-Pro.

[Roger ClarkParticipant @rogerclark]

Now you know what a piece of metal goes through, be kind, go faster

Edited By Rockingdodge on 09/01/2020 10:36:04

[not done it yetParticipant @notdoneityet]

The shaper vids might depend on how fast the auto focus might work, if in use and able to work?🙂

[Howard LewisParticipant @howardlewis46836]

Expected that at 1800 rpm, the view would become "collideoscopic"

And I thought that I didn't spend enough time in the workshop!

Howard

[Author]

Posts