Leeky diverter valve on a ‘telephone’ style bath/shower mixer tap

Leeky diverter valve on a ‘telephone’ style bath/shower mixer tap

This topic has 1 reply, 2 voices, and was last updated 5 October 2026 at 22:02 by noel shelley.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
5 October 2026 at 21:03 #868045
jon hill 3
Participant
@jonhill3
Not so familier with these style of ‘telephone’ shower / bath taps. I bought a used gold plated Samuel Heath set which leeked from every possible point.
I have rectified all but one leek which comes form the divertor handle through the stem. The orings have been replaced and more or less hold in the shower and bath function.
I have tried ptfe tape around the outside between the flange nut, connecting stem and handle which hasnt stopped the leek. I have also tried wrapping ptfe tape on the other side of the flange nut and handle, this has had some success but not elliminated the problem.

Can anyone recommend another solution eg soft jointing compound that is friendly to orings? I have though about jetblue but have heard it doesnt work well with rubber although perhaps small traces wont harm the rubber.

I also considered plumbers mate but this doesn’t seem to hold as well when wet and from experience.
Advert

5 October 2026 at 22:02 #868047
noel shelley
Participant
@noelshelley55608
There are many combinations of O ring size and section I would try a different size or section, the 2 common types are BS sizes or metric. Sealing compounds are not really for Orings. Good luck. Noel.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Picomite Version 7 – better than Arduino?
  Started by: IanT in: Electronics in the Workshop
- 4
- 8
- 6 October 2026 at 00:56
  Michael Gilligan
- Where is it all going? Claude – CAD – product
  Started by: Mike Hurley in: CAD – Technical drawing & design
- 8
- 9
- 5 October 2026 at 23:08
  David Senior
- Leeky diverter valve on a ‘telephone’ style bath/shower mixer tap
  Started by: jon hill 3 in: Related Hobbies including Vehicle Restoration
- 2
- 2
- 5 October 2026 at 22:02
  noel shelley
- Cross Drilling Jigs
  Started by: peak4 in: Workshop Tools and Tooling
- 9
- 21
- 5 October 2026 at 18:50
  old mart
- Portoss lathe – new to me.
  Started by: File Handle in: Beginners questions
- 6
- 14
- 5 October 2026 at 18:45
  old mart
- Hemholtz coil positioning
  Started by: John Purdy in: Clocks and Scientific Instruments
- 1
- 1
- 5 October 2026 at 18:12
  John Purdy
- Preview of whats coming in Freecad 26.3
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 4
- 17
- 5 October 2026 at 16:09
  Russell Eberhardt
- My adventures with a bench top CNC mill 1 2 3 4
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 81
- 5 October 2026 at 15:04
  John Hinkley
- Midlands Model Engineering Exhibition, Thursday 15th to Sunday 18th October 2026
  Started by: Meridienne Exhibitions 1 in: Exhibitions, Shows and Club Events
- 4
- 7
- 5 October 2026 at 10:12
  Meridienne Exhibitions 1
- Interactive article on How Machines Learned Precision
  Started by: glinscott in: Suggested Online Resources
- 6
- 8
- 5 October 2026 at 01:27
  Pete
- Warco WM180 Autofeed Speed 1 2
  Started by: James A in: Workshop Tools and Tooling
- 13
- 37
- 4 October 2026 at 22:51
  southernchap
- Metric threads on a Myford super 7 with quick change gearbox?
  Started by: Keith Charters in: Beginners questions
- 6
- 11
- 4 October 2026 at 16:14
  howardb
- Harrison L5 mk2 or not
  Started by: sean logie in: Workshop Tools and Tooling
- 5
- 11
- 4 October 2026 at 15:59
  sean logie
- Canterbury lamb
  Started by: Michael Callaghan in: General Questions
- 1
- 1
- 4 October 2026 at 11:33
  Michael Callaghan
- Drilling accurate depth holes 1 2
  Started by: Bob Sillitoe in: Beginners questions
- 15
- 29
- 4 October 2026 at 09:47
  Bo’sun
- What Did You Do Today 2026 1 2 … 8 9
  Started by: JasonB in: The Tea Room
- 51
- 202
- 3 October 2026 at 22:41
  Nigel Graham 2
- Hello Everyone (New Member Introduction)
  Started by: cedricvale in: Introduce Yourself – New members start here!
- 4
- 4
- 3 October 2026 at 22:25
  Nigel Graham 2
- SOS! Rare 1950’s tapered brass ‘Bray 657A’ valve (or someone who could repair 1 2
  Started by: jamiej in: General Questions
- 14
- 29
- 3 October 2026 at 22:21
  duncan webster 1
- Blank posts in forum
  Started by: Mark Rand in: New Forum Software questions, comments and Test Threads
- 3
- 3
- 3 October 2026 at 21:50
  vic newey
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 334
- 3 October 2026 at 19:53
  Phil Whitley
- FORNCETT STEAM MUSEUM 4th Oct 2026
  Started by: noel shelley in: Exhibitions, Shows and Club Events
- 3
- 3
- 3 October 2026 at 19:33
  Julie Ann
- M-DRO MS 272 series
  Started by: renardiere7 in: Workshop Tools and Tooling
- 2
- 3
- 3 October 2026 at 19:09
  renardiere7
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2 3
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 55
- 3 October 2026 at 19:08
  David Frith
- Mechanics magazine 1942/43
  Started by: Michael Callaghan in: General Questions
- 3
- 4
- 3 October 2026 at 16:18
  Nicholas Farr
- Boiler stays
  Started by: Michael Callaghan in: Locomotives
- 7
- 11
- 3 October 2026 at 13:34
  Michael Callaghan

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies