brass flat stock

brass flat stock

This topic has 6 replies, 4 voices, and was last updated 12 January 2024 at 21:30 by D.A.Godley.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
11 January 2024 at 16:35 #706251
Garry Martin 1
Participant
@garrymartin1
does anyone know where i can get 7mm x 1mm flat stock
Advert

11 January 2024 at 16:55 #706252
bernard towers
Participant
@bernardtowers37738
I should imagine 8 x 1 is a standard size which only leaves 1 mm to take off
11 January 2024 at 16:57 #706253
JasonB
Moderator
@jasonb
You will probably have to get 19swg sheet (closest to 1mm), cut into strips and then mill to the 7mm width. M-Machine do the 19swg sheet

Some of the European suppliers keep a better range of small metric but can’t see it listed on the couple I have used such as GHW
11 January 2024 at 17:08 #706254
bernard towers
Participant
@bernardtowers37738
K & S do 1mm strips
12 January 2024 at 16:26 #706579
Garry Martin 1
Participant
@garrymartin1
i have bought 7×1 before just cant remember where
12 January 2024 at 16:33 #706596
JasonB
Moderator
@jasonb
Might have been Eileen’s Emporium but they have closed down. Cambrian are doing a bit of their stuff but I looked before posting and could not see 7×1
12 January 2024 at 21:30 #706680
D.A.Godley
Participant
@d-a-godley
Keatley ( metals) Ltd , 01212364300 .

They are normally good for most sizes .

I know them only as a satisfied customer .
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Traditional fly press uses
  Started by: choochoo_baloo in: Workshop Tools and Tooling
- 9
- 9
- 31 July 2025 at 21:51
  Nicholas Farr
- William Hazeldine … Proving Machine
  Started by: Michael Gilligan in: Materials
- 5
- 9
- 31 July 2025 at 21:36
  Michael Gilligan
- Is this 3 phase motor suitable for delta/VFD? 1 2
  Started by: choochoo_baloo in: Electronics in the Workshop
- 17
- 26
- 31 July 2025 at 20:48
  Mark Hall
- A little bit on the side
  Started by: JasonB in: Work In Progress and completed items
- 3
- 10
- 31 July 2025 at 19:35
  JasonB
- Cut knurling
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 14
- 31 July 2025 at 19:17
  Fulmen
- CNC Coolant 1 2
  Started by: Steve355 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 37
- 31 July 2025 at 19:13
  Steve355
- Recommended storage for heavy lathe tooling
  Started by: choochoo_baloo in: Help and Assistance! (Offered or Wanted)
- 12
- 14
- 31 July 2025 at 18:04
  Speedy Builder5
- Another Mystery Tool!
  Started by: Martin King 2 in: Help and Assistance! (Offered or Wanted)
- 8
- 11
- 31 July 2025 at 18:00
  Speedy Builder5
- Suspicious Post? (Letters)
  Started by: Nigel Graham 2 in: The Tea Room
- 1
- 1
- 31 July 2025 at 17:53
  Nigel Graham 2
- What a flipping cheek !
  Started by: Speedy Builder5 in: The Tea Room
- 2
- 2
- 31 July 2025 at 17:31
  Nigel Graham 2
- What Did You Do Today 2025 1 2 … 8 9
  Started by: JasonB in: The Tea Room
- 33
- 208
- 31 July 2025 at 16:07
  Durhambuilder
- Mary beam engine
  Started by: richard davis 2 in: Beginners questions
- 7
- 10
- 31 July 2025 at 15:06
  Roderick Jenkins
- Boiler Design – issue 4765 1 2 … 9 10
  Started by: Charles Lamont in: Model Engineer & Workshop
- 28
- 241
- 31 July 2025 at 14:47
  Charles Lamont
- retirement aaargh!
  Started by: grimme in: General Questions
- 16
- 17
- 31 July 2025 at 12:53
  Michael Gilligan
- A lot of al/alloy, new engine, just finished
  Started by: half whit in: Work In Progress and completed items
- 5
- 6
- 31 July 2025 at 10:57
  half whit
- Why am I confused?
  Started by: JimmieS in: The Tea Room
- 4
- 5
- 31 July 2025 at 08:54
  JimmieS
- Unusual lathe chuck
  Started by: Steve101 in: Workshop Tools and Tooling
- 3
- 4
- 31 July 2025 at 08:50
  Steve101
- Tapping question
  Started by: Rich2502 in: General Questions
- 9
- 10
- 31 July 2025 at 08:38
  Nicholas Farr
- Amadeal lathes – Any good?? 1 2
  Started by: Tim Sallows in: Workshop Tools and Tooling
- 21
- 46
- 31 July 2025 at 05:25
  Bill Phinn
- “Your Sketch Is Not Closed,” says Alibre Atom, “So tough!”HERE?ERE? 1 2
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 9
- 29
- 30 July 2025 at 22:47
  blowlamp
- milling chuck
  Started by: moonman in: Workshop Tools and Tooling
- 11
- 22
- 30 July 2025 at 20:18
  bernard towers
- How to balance a cup grinding wheel
  Started by: Clive B in: Workshop Tools and Tooling
- 9
- 15
- 30 July 2025 at 20:00
  Clive B
- smokeless cutting oil 1 2
  Started by: Chris12 in: General Questions
- 16
- 30
- 30 July 2025 at 18:06
  JasonB
- My experiences with an ELS lathe
  Started by: David Senior in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 21
- 30 July 2025 at 17:35
  David Senior
- Arc Euro Trade Ltd. 1 2 3
  Started by: Ketan Swali in: General Questions
- 46
- 53
- 30 July 2025 at 16:48
  Howard Lewis

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies