A recent thread has vanished – NOT

A recent thread has vanished – NOT

This topic has 10 replies, 6 voices, and was last updated 31 January 2021 at 17:53 by old mart.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
31 January 2021 at 15:02 #27932
old mart
Participant
@oldmart
Advert

31 January 2021 at 15:02 #523933
old mart
Participant
@oldmart
A new member posted a querie about the 100mm four jaw chuck he had bought not fitting the spindle of his lathe. There were several replies including a couple from me including some pictures from my album of a similar chuck which I had modified to fit my 7 X 12 Warco lathe.

The complete thread has dissapeared, can it be resurrected?
31 January 2021 at 15:07 #523935
Rik Shaw
Participant
@rikshaw
Do you mean this?

https://www.model-engineer.co.uk/forums/postings.asp?th=170682&p=1

Rik

Edited By Rik Shaw on 31/01/2021 15:09:09
31 January 2021 at 15:11 #523937
Michael Gilligan
Participant
@michaelgilligan61133
More likely this, I think : **LINK**

https://www.model-engineer.co.uk/forums/postings.asp?th=170841

MichaelG.
31 January 2021 at 15:57 #523948
old mart
Participant
@oldmart
Thats the one, Michael, I hope one of the moderators can reinstate it, the op must be very confused, I certainly was.
31 January 2021 at 16:02 #523950
JasonB
Moderator
@jasonb
It's still there otherwise Michael would not have been able to put the link up and the OP has posted in the thread a few minutes ago.

TIP if you can't find a thread you posted in then go to the top of the page and along the green bar click "My posts" and look down the list.
31 January 2021 at 16:52 #523963
Ron Laden
Participant
@ronladen17547
I posted half an hour ago in my Class 22 which I can see in the Latest Forum Posts box to the right but its disappeared from Latest Posts here…?
31 January 2021 at 17:14 #523968
JasonB
Moderator
@jasonb
OK. I know what may be causing this and we will get it sorted.
31 January 2021 at 17:24 #523971
old mart
Participant
@oldmart
Good result thanks everyone.
31 January 2021 at 17:48 #523983
not done it yet
Participant
@notdoneityet
Old mart,

Were your replies not in your posting record? They were there when I just looked.
31 January 2021 at 17:53 #523984
old mart
Participant
@oldmart
N-D-I-Y, I have never thought of looking for my posting record until you mentioned it.
Author

Posts

Viewing 11 posts - 1 through 11 (of 11 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Reconstruction of dimensions fom a photo…
  Started by: Robin Graham in: Beginners questions
- 6
- 12
- 27 August 2026 at 07:40
  JasonB
- What is the easiest thin steel sheet to bend without cracking?
  Started by: elowen01 in: Materials
- 2
- 2
- 27 August 2026 at 07:23
  JasonB
- Photography in the workshop (for the inept)
  Started by: Pippin in: Workshop Techniques
- 9
- 14
- 27 August 2026 at 06:55
  JasonB
- When is a threaded insert preferable to tapping directly into aluminum?
  Started by: elowen01 in: General Questions
- 16
- 20
- 27 August 2026 at 02:59
  elowen01
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2 3
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 54
- 27 August 2026 at 00:36
  David Frith
- I built another one …
  Started by: Mick B1 in: Work In Progress and completed items
- 2
- 2
- 26 August 2026 at 23:29
  bernard towers
- Cutting 25 thou grooves for a couple of circlips
  Started by: Andrew Tinsley in: General Questions
- 9
- 20
- 26 August 2026 at 21:17
  Andrew Tinsley
- Taper turning attachment
  Started by: Bernard Reilly in: Workshop Tools and Tooling
- 6
- 8
- 26 August 2026 at 20:56
  Clive Foster
- Toolroom Takeover 2026
  Started by: Pippin in: The Tea Room
- 2
- 2
- 26 August 2026 at 20:40
  Michael Gilligan
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 3
- 4
- 26 August 2026 at 19:32
  Mick B1
- Ketan Swali 1 2 3
  Started by: Bill Davies 2 in: The Tea Room
- 44
- 51
- 26 August 2026 at 18:55
  Bill Dawes
- Flywheel material
  Started by: Speedy Builder5 in: Materials
- 12
- 19
- 26 August 2026 at 18:16
  JasonB
- Chronos closing down. 1 2 3 4
  Started by: Andrew Tinsley in: General Questions
- 35
- 80
- 26 August 2026 at 18:04
  Roderick Jenkins
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 3
- 7
- 26 August 2026 at 16:44
  JasonB
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 21
- 26 August 2026 at 16:10
  Derek Drover
- Scam response to advert
  Started by: Lee Rogers in: The Tea Room
- 2
- 2
- 26 August 2026 at 16:04
  Derek Drover
- Parting off 1 2
  Started by: Peter Simpson 3 in: Beginners questions
- 19
- 42
- 26 August 2026 at 12:50
  Howard Lewis
- Plug in Solar 1 2 3 4
  Started by: Vic in: The Tea Room
- 30
- 97
- 26 August 2026 at 10:47
  bernard towers
- Survival Challenge TV for engineers!
  Started by: Neil Wyatt in: The Tea Room
- 14
- 23
- 26 August 2026 at 10:21
  noel shelley
- Drill grinders/sharpeners and their capabilities
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 9
- 20
- 26 August 2026 at 09:32
  Pippin
- Nameplate Identification
  Started by: onarion67 in: Workshop Techniques
- 4
- 8
- 25 August 2026 at 19:07
  Martin Johnson 1
- Honing cylinder
  Started by: Speedy Builder5 in: Workshop Techniques
- 6
- 11
- 25 August 2026 at 17:15
  Speedy Builder5
- Annealing extruded acrylic
  Started by: Mick Bailey in: Materials
- 1
- 1
- 25 August 2026 at 09:49
  Mick Bailey
- Myford Lathe Identification
  Started by: Captain Barnacles in: Manual machine tools
- 8
- 14
- 25 August 2026 at 08:40
  Howard Lewis
- All things Beaver Mill 1 2 … 9 10
  Started by: Robert James 3 in: Manual machine tools
- 43
- 238
- 25 August 2026 at 05:37
  Lex Davis

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies