Fitting 200mm bison 4 jaw to D1-3 Spindle

This topic has 1 reply, 1 voice, and was last updated 3 January 2016 at 16:41 by andrew briggs.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
3 January 2016 at 16:41 #219193
andrew briggs
Participant
@andrewbriggs24687
Hi, looking for any ideas to fit a 200mm bison independent 4 jaw chuck to a D1-3 backplate.

The register is 110mm with 4 holes bolting from the front and these will coincide with the 3 pin threads of the backplate

Andy
Advert

3 January 2016 at 16:41 #24301
andrew briggs
Participant
@andrewbriggs24687
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Mysterious Morse Tapers
  Started by: Pippin in: Workshop Tools and Tooling
- 10
- 18
- 25 July 2026 at 17:12
  Pippin
- Buzz Ballz packaging “unrecyclable” in U.K.
  Started by: Michael Gilligan in: The Tea Room
- 3
- 3
- 25 July 2026 at 16:47
  bernard towers
- Hobbing a Brass or Aluminium Drive Pulley to Stop Belt Slippage
  Started by: Blue Heeler in: Hints And Tips for model engineers
- 5
- 8
- 25 July 2026 at 16:37
  ega
- Plug in Solar 1 2 3 4
  Started by: Vic in: The Tea Room
- 26
- 84
- 25 July 2026 at 15:46
  Michael Gilligan
- Garden water pump
  Started by: John MC in: The Tea Room
- 7
- 7
- 25 July 2026 at 12:58
  Speedy Builder5
- Deep drilling
  Started by: Speedy Builder5 in: Workshop Techniques
- 10
- 22
- 25 July 2026 at 12:56
  Speedy Builder5
- Is anyone interested in developping a new series of model engines? 1 2 3 4
  Started by: paulmichael1084 in: General Questions
- 20
- 84
- 25 July 2026 at 12:31
  paulmichael1084
- REXON SS16A scroll saw
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 7
- 24 July 2026 at 22:32
  Michael Gilligan
- Posts by new member containing ads.
  Started by: alecs in: Website Questions, Comments, and Suggestions
- 5
- 9
- 24 July 2026 at 20:22
  bernard towers
- Doris Black 5 mech lubricator question.
  Started by: kevmol57 in: Workshop Techniques
- 4
- 10
- 24 July 2026 at 13:25
  kevmol57
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 71
- 24 July 2026 at 10:27
  KEITH BEAUMONT
- Long awaited FreeCAD version 1.1 released
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 3
- 8
- 24 July 2026 at 10:16
  Roger Woollett
- Nut screws washer and bolts – you know the old joke
  Started by: Kiwi Bloke in: General Questions
- 16
- 22
- 24 July 2026 at 08:55
  Gerard O’Toole
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2 3
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 53
- 24 July 2026 at 08:18
  David Frith
- Chat GPTgoes rogue and launches cyber attack
  Started by: Robert Atkinson 2 in: The Tea Room
- 8
- 9
- 24 July 2026 at 07:29
  Adrian R2
- Workshop Heaven but must have cost a fortune.
  Started by: alan ord 2 in: Workshop Tools and Tooling
- 5
- 5
- 24 July 2026 at 02:19
  Bill Phinn
- What Did You Do Today 2026 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 43
- 152
- 23 July 2026 at 21:50
  Nigel Graham 2
- Mitutoyo Metrology Handbook – Still Available From Mitutoyo UK
  Started by: southernchap in: Books
- 3
- 6
- 23 July 2026 at 21:46
  Robert Atkinson 2
- It’s A Compressor, Jim, But Not… 1 2
  Started by: Nigel Graham 2 in: General Questions
- 12
- 30
- 23 July 2026 at 21:17
  Nigel Graham 2
- Dart 7 1/4 Build
  Started by: Roy Birch in: Locomotives
- 1
- 1
- 23 July 2026 at 14:25
  Roy Birch
- Electronics EL714-C DRO Display
  Started by: houstonceng in: Workshop Tools and Tooling
- 2
- 3
- 23 July 2026 at 13:16
  houstonceng
- Mechanical lubrication steam locos. Non return valve opening pressure
  Started by: peter allen 1 in: General Questions
- 7
- 14
- 23 July 2026 at 10:28
  noel shelley
- BlueBerries
  Started by: Michael Gilligan in: The Tea Room
- 13
- 22
- 23 July 2026 at 02:10
  Grindstone Cowboy
- Bridgeport Series 1 CNC 1 2 3 4
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 76
- 23 July 2026 at 00:47
  seemack
- Help needed: Custom turned steering rack plug (Derbyshire / DE4)
  Started by: darikde4 in: General Questions
- 3
- 3
- 22 July 2026 at 23:03
  paulmichael1084

Fitting 200mm bison 4 jaw to D1-3 Spindle

Fitting 200mm bison 4 jaw to D1-3 Spindle

Latest Replies

Latest Issue

August 2026

Newsletter Sign-up

Latest Replies