M2.5 x 8 mm Insert Torx Screws

M2.5 x 8 mm Insert Torx Screws

This topic has 2 replies, 2 voices, and was last updated 21 July 2012 at 08:42 by Michael Gilligan.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
21 July 2012 at 08:32 #94901
Kevin Bennett
Participant
@kevinbennett25223
Hi, a modification question

I have broken a 2.5mm insert screw I had to drill it out in a DCMT 11T304 tip, as hole in the tip will take a 3mm standard screw has anyone modified tip holders to 3mm screw.

as 3mm is easy to get and use a standard Allan key

I can get one from RS components £1.25 each "outrages" cost for 1 off , or from china on eBay 10 off for £5.09 for + shipping.

thanks Kevin
Advert

21 July 2012 at 08:32 #16846
Kevin Bennett
Participant
@kevinbennett25223
21 July 2012 at 08:42 #94902
Michael Gilligan
Participant
@michaelgilligan61133
Kevin,

Pricey little blighters aren't they!

But …

if ever there was a place you need top quality, and good fit, a toolholder must be it.

MichaelG.

Edited By Michael Gilligan on 21/07/2012 08:43:50
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Clarkson Horizontal – Redefined in Metric
  Started by: JasonB in: Stationary engines
- 8
- 23
- 23 June 2026 at 14:07
  JasonB
- Gas Tap Valves. Vintage 1 2
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 18
- 50
- 23 June 2026 at 13:42
  alecs
- Rapidor Manchester re-build
  Started by: homecat88 in: Introduce Yourself – New members start here!
- 3
- 4
- 23 June 2026 at 13:41
  gary
- Running 380V 3-phase motor on 230V 1-phase 1 2
  Started by: jimalm in: Electronics in the Workshop
- 14
- 32
- 23 June 2026 at 13:01
  Robert Atkinson 2
- Advice required
  Started by: janet.ho001 in: Introduce Yourself – New members start here!
- 2
- 2
- 23 June 2026 at 12:52
  duncan webster 1
- Orbital – Not your Usual Oscillator!
  Started by: JasonB in: Stationary engines
- 14
- 22
- 23 June 2026 at 12:23
  duncan webster 1
- Hot radiators in summer
  Started by: Gary Wooding in: The Tea Room
- 7
- 8
- 23 June 2026 at 12:13
  JasonB
- Taylor Hobson Pantograph Engraver Model D 1 2
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 10
- 41
- 23 June 2026 at 11:15
  jaCK Hobson
- Rob Roy Build
  Started by: Dalboy in: Locomotives
- 4
- 15
- 22 June 2026 at 21:24
  Dalboy
- Help identifying a mystery thread
  Started by: Beardy Mike in: Beginners questions
- 8
- 15
- 22 June 2026 at 19:04
  Nicholas Farr
- Unwanted Car Software Update
  Started by: Chris Crew in: The Tea Room
- 12
- 16
- 22 June 2026 at 16:48
  paul1956
- Oiling Lathe Ways
  Started by: Blue Heeler in: Beginners questions
- 7
- 8
- 22 June 2026 at 13:34
  Bazyle
- Farm Boy dimensions
  Started by: Speedy Builder5 in: Stationary engines
- 3
- 4
- 22 June 2026 at 13:02
  JasonB
- Nickel Silver
  Started by: Carl in: Materials
- 10
- 15
- 22 June 2026 at 11:52
  Roderick Jenkins
- Flame Licker Engine & USA made 1930’s Empire Water Pump
  Started by: Blue Heeler in: Miscellaneous models
- 2
- 2
- 22 June 2026 at 10:03
  Bazyle
- Film Projectors/Astronomy/Radio Ham-Mark Stuckey
  Started by: Mark Easingwood in: Related Hobbies including Vehicle Restoration
- 1
- 1
- 21 June 2026 at 22:40
  Mark Easingwood
- Baffled by flatted-shank spot weld drills
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 4
- 8
- 21 June 2026 at 22:26
  Bill Phinn
- Wallace valvegear simulator 1 2
  Started by: Kevan Shaw in: General Questions
- 7
- 27
- 21 June 2026 at 21:32
  Kevan Shaw
- All things Beaver Mill 1 2 … 9 10
  Started by: Robert James 3 in: Manual machine tools
- 43
- 229
- 21 June 2026 at 21:16
  Mark Rand
- Green Dragon Sustainable Fuel
  Started by: Neil Wyatt in: Locomotives
- 14
- 24
- 21 June 2026 at 21:07
  Mark Rand
- Is improvement work on this forum/website still ongoing? 1 2 … 5 6
  Started by: Ian P in: Website Questions, Comments, and Suggestions
- 38
- 140
- 21 June 2026 at 19:59
  bernard towers
- Emco Compact 5 milling table restoration
  Started by: rikt in: Manual machine tools
- 5
- 9
- 21 June 2026 at 15:39
  Eric Lucas
- Firehole door for 5inch gauge
  Started by: Perko7 in: Locomotives
- 3
- 3
- 21 June 2026 at 15:22
  Weary
- New Toy Day
  Started by: Julie Ann in: Workshop Tools and Tooling
- 10
- 15
- 21 June 2026 at 15:10
  old mart
- Greetings
  Started by: dee in: Introduce Yourself – New members start here!
- 7
- 10
- 21 June 2026 at 13:53
  dobbs57

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies