Compton Series 2000 starter

This topic has 3 replies, 2 voices, and was last updated 3 December 2020 at 14:42 by Peter Howell 1.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
3 December 2020 at 11:58 #511369
Peter Howell 1
Participant
@peterhowell1
My Myford Super 7 has a Compton Series 2000 starter.

Occasionally it doesn't switch on. The contactor jumps but doesn't lock on. If I manually press in the contactor block in (with an insulated screwdriver) it works. Then the starter will work normally for several stop/starts.

Is there something I can do or will I have to replace the whole unit?
Advert

3 December 2020 at 11:58 #14105
Peter Howell 1
Participant
@peterhowell1
3 December 2020 at 12:27 #511378
john fletcher 1
Participant
@johnfletcher1
No need of a new starter. I'm not familiar with a Crompton 2000, but most probably the latching /auxiliary contacts are in need of a careful clean. Disconnect the electric supply, remove the starter cover and using a torch you will see the contacts, insert a piece of paper between the contacts, carefully push the contacts closed, then pull out the paper. that usually does the trick. Also, have a look at the over load contacts, as they are in series with the latching ones. and they might be in need of the treatment. . John
3 December 2020 at 14:42 #511411
Peter Howell 1
Participant
@peterhowell1
Thanks John, unfortunately I've just looked and the Crompton appears to be completely sealed. There are no contacts visible. I would have to dismantle the assembly to get to them. The same applies to the overload unit.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- QCTP
  Started by: James A in: Workshop Tools and Tooling
- 13
- 15
- 13 July 2026 at 22:16
  Bazyle
- Small electromagnetic pump via E-Bay
  Started by: Clive Foster in: Manual machine tools
- 5
- 8
- 13 July 2026 at 20:02
  John Hinkley
- Windows 11 background pictures
  Started by: old mart in: The Tea Room
- 4
- 4
- 13 July 2026 at 19:49
  Mark Rand
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 41
- 139
- 13 July 2026 at 17:58
  duncan webster 1
- pitman arm
  Started by: martin haysom in: General Questions
- 6
- 9
- 13 July 2026 at 17:00
  Dave Halford
- Martin Cleeve Swing Clear Retracting Toolholder 1 2
  Started by: Roger Harvey in: Workshop Tools and Tooling
- 18
- 27
- 13 July 2026 at 15:21
  ega
- Boiler problem
  Started by: Zan in: Help and Assistance! (Offered or Wanted)
- 5
- 8
- 13 July 2026 at 14:25
  Zan
- First Printer
  Started by: vintagengineer in: 3D Printers and 3D Printing
- 7
- 8
- 13 July 2026 at 13:47
  John Haine
- Pipe Size Puzzle.
  Started by: Nigel Graham 2 in: Locomotives
- 5
- 6
- 13 July 2026 at 11:46
  duncan webster 1
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 12
- 46
- 13 July 2026 at 10:29
  Graham Meek
- Mini-lathe parts source
  Started by: Dunc in: General Questions
- 7
- 12
- 13 July 2026 at 08:28
  Dell
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 2
- 7
- 12 July 2026 at 20:54
  old mart
- Cleaning years of nicotine exposure and some touch ups
  Started by: rumz in: Traction engines
- 5
- 6
- 12 July 2026 at 18:00
  Georgineer
- 1930 Austin 12 with 3rd brush dynamo
  Started by: john fletcher 1 in: General Questions
- 15
- 23
- 12 July 2026 at 12:00
  Howard Lewis
- Lathe coolant applicators 1 2
  Started by: lucerne in: Manual machine tools
- 16
- 29
- 12 July 2026 at 11:41
  Charles Lamont
- Metal saw
  Started by: Speedy Builder5 in: Workshop Techniques
- 4
- 4
- 12 July 2026 at 10:25
  martin haysom
- SmallRig Cheese Plate
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 4
- 10
- 12 July 2026 at 10:05
  Michael Gilligan
- Bridgeport Series 1 CNC 1 2 3
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 56
- 12 July 2026 at 08:11
  seemack
- Another what’s this thread….
  Started by: Hollowpoint in: General Questions
- 6
- 9
- 11 July 2026 at 23:48
  Nigel Graham 2
- What is this?
  Started by: Sonic Escape in: General Questions
- 16
- 24
- 11 July 2026 at 22:45
  Paul Mills 4
- Air con cost?
  Started by: Ian Parkin in: The Tea Room
- 7
- 8
- 11 July 2026 at 19:34
  Mark Rand
- Impending collapse in NYC
  Started by: Michael Gilligan in: The Tea Room
- 12
- 23
- 11 July 2026 at 17:08
  Michael Gilligan
- Optimum products? 1 2 3
  Started by: Alan Ambrose in: Manual machine tools
- 24
- 53
- 11 July 2026 at 13:57
  Adam Harris
- Spindle/bearings fit query for X2 type mill 1 2 3
  Started by: fingerscrossed in: Manual machine tools
- 14
- 53
- 11 July 2026 at 12:34
  Dave Halford
- Hole Sizes
  Started by: John Purdy in: 3D Printers and 3D Printing
- 6
- 12
- 11 July 2026 at 10:03
  JasonB

Compton Series 2000 starter

Compton Series 2000 starter

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies