The world of model and hobby engineering
Forums
Help
Register
Log in
Home › Forums › Model Engineer. › Mystery engine
I’ve just acquired this four cylinder oscillator. It has a weird feed pump, and to my eyes the lubricator is inverted. Some of it very crude, but the pipe work is immaculate.
Any ideas as to what it is?
This would be interesting to see if you can clean it up and get it running even if it is only on air. I can’t help with identifying it
There is a very similar one on Station Road Steam which suggests they may be to a published design.
Small V4 engine
This also looks to the same design but unfinished
https://www.easyliveauction.com/catalogue/lot/ad95c130c6b15169f6d0a43955e78d0f/1f1638c9faeb7c2641b7b1e9c67628d0/tuesday-15th-wednesday-16th-september-sale-to-include-home/
That’s definitely the beast. I plan to clean it up and try it on air, but something is stopping it from turning over. I suspect the feed pump.
I think it may be a Peter Arnot design. There is a similar picture on the Sarik Hobbies website. https://www.sarikhobbies.com/product/arnot-v-four/?v=79cba1185463
That looks very much like it.
Home › Forums › Model Engineer. › Topics
Started by: YouraT in: Manual machine tools
Merddyn’s Dad
Started by: iacooper in: Clocks and Scientific Instruments
iacooper
Started by: Roy Birch in: Locomotives
duncan webster 1
Started by: Turbine Guy in: Stationary engines
Turbine Guy
Started by: gerry madden in: Manual machine tools
David Jupp
Started by: John Purdy in: Clocks and Scientific Instruments
John Purdy
Started by: Vic in: Workshop Tools and Tooling
Georgineer
Started by: Ramon Wilson in: Exhibitions, Shows and Club Events
mike T
Started by: BOB BLACKSHAW 1 in: 3D Printers and 3D Printing
Dave S
Started by: JA in: The Tea Room
JA
Started by: JohnF in: Workshop Tools and Tooling
old mart
Started by: Captain Barnacles in: Workshop Tools and Tooling
Bazyle
Started by: Rainbows in: Workshop Tools and Tooling
Fulmen
Started by: paul1956 in: Beginners questions
paul1956
Started by: Danni Burns in: Manual machine tools
Howard Lewis
Started by: Sonic Escape in: General Questions
Started by: Mark Davison 1 in: Clocks and Scientific Instruments
roy entwistle
Started by: Sonic Escape in: The Tea Room
Sonic Escape
Started by: JasonB in: The Tea Room
Started by: Peter Venn in: General Questions
Bill Dawes
Started by: Phil Whitley in: The Tea Room
Phil Whitley
Started by: Adam Harris in: Workshop Tools and Tooling
JasonB
Started by: duncan webster 1 in: CAD – Technical drawing & design
Started by: Ger in: Manual machine tools
derek hall 1
View full reply list.