The Quick Step Milling Unit

The Quick Step Milling Unit

This topic has 3 replies, 3 voices, and was last updated 11 June 2019 at 14:56 by ega.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
11 June 2019 at 12:47 #413698
Rod Ashton
Participant
@rodashton53132
Could anyone tell me what power the motor is please?

Had one under the bench for years and now want to use it on a hybrid M/c.
Advert

11 June 2019 at 12:47 #19368
Rod Ashton
Participant
@rodashton53132
11 June 2019 at 14:51 #413710
John Hinkley
Participant
@johnhinkley26699
According to the wiring diagram accompanying the article about it in issue 53 of MEW, it was a Parvalux PM10 DC motor 220V, rated at 50W max rpm 4000.

John
11 June 2019 at 14:56 #413711
ega
Participant
@ega
Further to John Hinckley's information, the test sheet with my machine says "60W cont. 100w 15 min".
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Have I got 12-28 UNF wrong or has Völkel?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 12
- 21
- 16 September 2026 at 01:38
  Bill Phinn
- Photography in the workshop (for the inept) 1 2
  Started by: Pippin in: Workshop Techniques
- 20
- 35
- 16 September 2026 at 00:03
  Nigel Graham 2
- Making curved parts
  Started by: Steve Huckins in: Beginners questions
- 7
- 11
- 15 September 2026 at 23:51
  Pete
- pendulum support springs
  Started by: gerry madden in: Clocks and Scientific Instruments
- 1
- 1
- 15 September 2026 at 23:43
  gerry madden
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 6
- 9
- 15 September 2026 at 23:24
  blowlamp
- Microscope eyepieces
  Started by: gerry madden in: Clocks and Scientific Instruments
- 3
- 7
- 15 September 2026 at 23:20
  gerry madden
- Pittler C3 lathe, dividing and gear cutting attachments
  Started by: vic newey in: Workshop Tools and Tooling
- 3
- 3
- 15 September 2026 at 22:57
  Nigel Graham 2
- A new Milling Machine
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 8
- 20
- 15 September 2026 at 20:26
  Wade Beatty
- Robinson scale engine
  Started by: Frank Waugh in: Stationary engines
- 2
- 2
- 15 September 2026 at 18:49
  JasonB
- New to castings
  Started by: BOB BLACKSHAW 1 in: Workshop Techniques
- 4
- 8
- 15 September 2026 at 18:06
  JasonB
- Do you chase a galvanized thread, or leave it alone?
  Started by: elowen01 in: Workshop Tools and Tooling
- 6
- 8
- 15 September 2026 at 16:49
  noel shelley
- … I had hoped we were growing-out of this nonsense !
  Started by: Michael Gilligan in: The Tea Room
- 13
- 16
- 15 September 2026 at 16:42
  Graham Meek
- CLarke C430 lathe threading
  Started by: tatler in: Help and Assistance! (Offered or Wanted)
- 4
- 4
- 15 September 2026 at 16:31
  DC31k
- Myford ML7 Motor
  Started by: ian Holdsworth in: Manual machine tools
- 4
- 4
- 15 September 2026 at 09:57
  Michael Gilligan
- Octopus Heat Pump 1 2 3
  Started by: Michael Gilligan in: The Tea Room
- 20
- 63
- 15 September 2026 at 09:46
  Michael Gilligan
- Annealing extruded acrylic
  Started by: Mick Bailey in: Materials
- 2
- 3
- 15 September 2026 at 08:40
  bernard towers
- Drive coil ampere turns for seconds pendulum
  Started by: carlw in: Clocks and Scientific Instruments
- 3
- 9
- 15 September 2026 at 01:09
  carlw
- 4¾” 13swg copper tubing?
  Started by: martynt50 in: Materials
- 8
- 10
- 14 September 2026 at 22:36
  Mick Bailey
- Source of milling cutters post Arceurotradw
  Started by: Mike Crossfield in: Workshop Tools and Tooling
- 12
- 15
- 14 September 2026 at 21:57
  Mike Crossfield
- Quorn Belt Guard
  Started by: John Purdy in: 3D Printers and 3D Printing
- 9
- 13
- 14 September 2026 at 21:34
  John Purdy
- Revolution – The Future is Out There!
  Started by: JasonB in: Stationary engines
- 3
- 5
- 14 September 2026 at 20:50
  JA
- Tractor meeting in Babenhausen with a small model exhibition
  Started by: Werner Schleidt in: Traction engines
- 2
- 2
- 14 September 2026 at 20:15
  Roger B
- Arc closure and popularity of Chineese lathes
  Started by: File Handle in: The Tea Room
- 2
- 2
- 14 September 2026 at 18:54
  JasonB
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 6
- 14 September 2026 at 18:11
  Richard B
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 6
- 13
- 14 September 2026 at 18:07
  Mick Bailey

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies