Shell ASPA Oil B

This topic has 2 replies, 2 voices, and was last updated 8 January 2013 at 18:57 by KWIL.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
8 January 2013 at 18:00 #108224
Graham Williams 5
Participant
@grahamwilliams5
Been given 5 litres of Shell ASPA Oil B (previously Oil 21) searched the web to find the VG spec, but can't find anything. Want to use it for lubing a Myford headstock etc, suspect that it is thinner than the VG32 usually recommended. Any Oil specialists out there that might advise as to it's suitability ?

Many thanks

Graham W
Advert

8 January 2013 at 18:00 #22406
Graham Williams 5
Participant
@grahamwilliams5
8 January 2013 at 18:57 #108227
KWIL
Participant
@kwil
I siuspect it is VG22 rather than the VG32 Hydraulic oil required for the Myford. Either buy some 32 Grade Hydraulic Oil or ask someone like Morris Oils for their advice,
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- LINKS FOR WORKSHOP AND MODEL ENGINEERING STLs AND OTHER FILES
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 2
- 3
- 25 June 2026 at 12:30
  JasonB
- How Good Are 3D Printers? 1 2
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 15
- 32
- 25 June 2026 at 11:22
  Neil Wyatt
- Hot radiators in summer
  Started by: Gary Wooding in: The Tea Room
- 13
- 18
- 25 June 2026 at 11:17
  Howard Lewis
- 3D Printing in the Home Workshop
  Started by: Colin Heseltine in: 3D Printers and 3D Printing
- 7
- 9
- 25 June 2026 at 11:17
  Neil Wyatt
- Hot milk variations
  Started by: Gary Wooding in: The Tea Room
- 12
- 18
- 25 June 2026 at 10:53
  Nicholas Farr
- Moving a Chester MF42Bb(removing milling tool)
  Started by: bowmandj1953 in: Introduce Yourself – New members start here!
- 3
- 6
- 25 June 2026 at 10:49
  bowmandj1953
- Letters and Parcels Box
  Started by: Michael Gilligan in: The Tea Room
- 9
- 12
- 25 June 2026 at 10:15
  noel shelley
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 57
- 25 June 2026 at 06:21
  dean clarke 2
- Running 380V 3-phase motor on 230V 1-phase 1 2
  Started by: jimalm in: Electronics in the Workshop
- 15
- 42
- 25 June 2026 at 00:54
  Andrew Kett
- Rapidor 3XM
  Started by: homecat88 in: Introduce Yourself – New members start here!
- 3
- 6
- 24 June 2026 at 21:42
  Nicholas Farr
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 655
- 24 June 2026 at 21:02
  Turbine Guy
- digital microscope for poor eyesight
  Started by: bernard towers in: Electronics in the Workshop
- 14
- 23
- 24 June 2026 at 19:40
  Neil Wyatt
- Testing Single Point Thread Fitment
  Started by: berwick in: Beginners questions
- 13
- 20
- 24 June 2026 at 15:42
  berwick
- Emco Compact 5 milling table restoration
  Started by: rikt in: Manual machine tools
- 5
- 10
- 24 June 2026 at 15:34
  rikt
- FARM BOY Ignition
  Started by: Speedy Builder5 in: I/C Engines
- 3
- 4
- 24 June 2026 at 15:17
  Speedy Builder5
- Gas Tap Valves. Vintage 1 2 3
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 19
- 53
- 23 June 2026 at 21:24
  Nigel Graham 2
- Taylor Hobson Pantograph Engraver Model D 1 2
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 10
- 42
- 23 June 2026 at 21:05
  Charles Jambon
- Rapidor Manchester re-build
  Started by: homecat88 in: Introduce Yourself – New members start here!
- 3
- 5
- 23 June 2026 at 19:19
  homecat88
- Advice required
  Started by: janet.ho001 in: Introduce Yourself – New members start here!
- 4
- 7
- 23 June 2026 at 19:12
  janet.ho001
- Orbital – Not your Usual Oscillator! 1 2
  Started by: JasonB in: Stationary engines
- 14
- 28
- 23 June 2026 at 19:11
  JasonB
- Clarkson Horizontal – Redefined in Metric
  Started by: JasonB in: Stationary engines
- 8
- 24
- 23 June 2026 at 18:48
  JasonB
- Rob Roy Build
  Started by: Dalboy in: Locomotives
- 4
- 15
- 22 June 2026 at 21:24
  Dalboy
- Help identifying a mystery thread
  Started by: Beardy Mike in: Beginners questions
- 8
- 15
- 22 June 2026 at 19:04
  Nicholas Farr
- Unwanted Car Software Update
  Started by: Chris Crew in: The Tea Room
- 12
- 16
- 22 June 2026 at 16:48
  paul1956
- Oiling Lathe Ways
  Started by: Blue Heeler in: Beginners questions
- 7
- 8
- 22 June 2026 at 13:34
  Bazyle

Shell ASPA Oil B

Shell ASPA Oil B

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies