Problems with “The Home Shop Machinist” website?

[old martParticipant @oldmart]

I use this forum and also the USA based Home shop machinist forum. It seems to be locked on one page at present, can anybody verify this?

[old martParticipant @oldmart]

[John HinkleyParticipant @johnhinkley26699]

It's working OK on my setup, O.M. That's Windows 10 + Firefox 69.0.3.

John

[old martParticipant @oldmart]

I am using W10 and edge, and even when googling it and selecting different results, it still doesn't work. It lets me log in but that's all.

[Chris Evans 6Participant @chrisevans6]

I am getting the same as you Old Mart. Also using edge.

[thaiguzziParticipant @thaiguzzi]

Not working here either. I look daily.

Win 10/Firefox.

But George Bullis who runs the site recently mentioned they were undergoing site renovation and would be "off air" for a day or two. Could be that.

[old martParticipant @oldmart]

Good for George, that will be the answer.

[old martParticipant @oldmart]

It is up and running with a new format, I had no problems adding a few comments just a few minutes ago.

[Mark RandParticipant @markrand96270]

It looks as if they've done a forum software upgrade, but have not yet loaded all the 'styles' for different looks and feels. Upgrading he software for a forum and its database is a fun thing to do (for very small values of fun). DAMHIKT!

[old martParticipant @oldmart]

There was concern that the old format was less secure than it should be.

[Rod AshtonParticipant @rodashton53132]

Which of the three mags is best for a manual and CNC shop. Would like to see a mag, although the website download still seems to be inoperative.

[old martParticipant @oldmart]

After being a member for several years, I managed to post my first photograph on the HSM. It now has a similar method to this forum.

[Author]

Posts