Indiana ME Show 26

Indiana ME Show 26

This topic has 2 replies, 3 voices, and was last updated 6 October 2026 at 11:53 by Weary.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
6 October 2026 at 09:57 #868063
JasonB
Moderator
@jasonb
For those that like stationary steam and IC engines this link should take you to the first post of several that contain over 400 photos from the show which was held last weekend. There is a video a few posts earlier.

https://www.homemodelenginemachinist.com/threads/2026-indiana-model-engine-show.37581/post-439515
Advert

6 October 2026 at 10:57 #868064
Nicholas Farr
Participant
@nicholasfarr14254
Hi JasaonB, a lot of nice work there, thanks for posting it.

Regards Nick.
6 October 2026 at 11:53 #868066
Weary
Participant
@weary
Thanks for posting that link Jason.

Some really nice engines there, at all kinds of scales and degrees of complexity. Some excellent inspirational ideas ….. just one more ‘project’ won’t hurt will it!

Regards,

Phil
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Window weights as a source of cast iron.?
  Started by: File Handle in: Materials
- 3
- 3
- 6 October 2026 at 19:38
  Baz
- Myford ML7 gearbox and how it affects metric change wheels.
  Started by: philml7 in: Introduce Yourself – New members start here!
- 4
- 4
- 6 October 2026 at 19:30
  DC31k
- Picomite Version 7 – better than Arduino?
  Started by: IanT in: Electronics in the Workshop
- 5
- 12
- 6 October 2026 at 18:43
  Dave S
- Blank posts in forum
  Started by: Mark Rand in: New Forum Software questions, comments and Test Threads
- 5
- 5
- 6 October 2026 at 18:32
  JasonB
- Portoss lathe – new to me.
  Started by: File Handle in: Beginners questions
- 6
- 15
- 6 October 2026 at 17:55
  File Handle
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 7
- 15
- 6 October 2026 at 17:41
  Mick Bailey
- 5 inch gauge Stirling single injector position
  Started by: Michael Callaghan in: Locomotives
- 2
- 2
- 6 October 2026 at 17:33
  Baz
- Hemholtz coil positioning
  Started by: John Purdy in: Clocks and Scientific Instruments
- 2
- 3
- 6 October 2026 at 17:19
  John Purdy
- Liney RV-2 Rescue
  Started by: JasonB in: Stationary engines
- 1
- 1
- 6 October 2026 at 16:37
  JasonB
- Leeky diverter valve on a ‘telephone’ style bath/shower mixer tap
  Started by: jon hill 3 in: Related Hobbies including Vehicle Restoration
- 6
- 8
- 6 October 2026 at 16:32
  Grindstone Cowboy
- Hello everyone
  Started by: andrew998 in: Introduce Yourself – New members start here!
- 2
- 2
- 6 October 2026 at 16:24
  Grindstone Cowboy
- Current Thoughts on 3 Phase Smart Meters
  Started by: Colin Heseltine in: The Tea Room
- 1
- 1
- 6 October 2026 at 15:49
  Colin Heseltine
- Problem firing up
  Started by: Michael Callaghan in: General Questions
- 13
- 19
- 6 October 2026 at 15:45
  Bazyle
- Drilling accurate depth holes 1 2
  Started by: Bob Sillitoe in: Beginners questions
- 15
- 30
- 6 October 2026 at 14:14
  Bob Sillitoe
- Where is it all going? Claude – CAD – product
  Started by: Mike Hurley in: CAD – Technical drawing & design
- 9
- 14
- 6 October 2026 at 13:58
  Andy Stopford
- Indiana ME Show 26
  Started by: JasonB in: Exhibitions, Shows and Club Events
- 3
- 3
- 6 October 2026 at 11:53
  Weary
- FORNCETT STEAM MUSEUM 4th Oct 2026
  Started by: noel shelley in: Exhibitions, Shows and Club Events
- 4
- 4
- 6 October 2026 at 08:22
  mike barrett 1
- Cross Drilling Jigs
  Started by: peak4 in: Workshop Tools and Tooling
- 9
- 21
- 5 October 2026 at 18:50
  old mart
- Preview of whats coming in Freecad 26.3
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 4
- 17
- 5 October 2026 at 16:09
  Russell Eberhardt
- My adventures with a bench top CNC mill 1 2 3 4
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 81
- 5 October 2026 at 15:04
  John Hinkley
- Midlands Model Engineering Exhibition, Thursday 15th to Sunday 18th October 2026
  Started by: Meridienne Exhibitions 1 in: Exhibitions, Shows and Club Events
- 4
- 7
- 5 October 2026 at 10:12
  Meridienne Exhibitions 1
- Interactive article on How Machines Learned Precision
  Started by: glinscott in: Suggested Online Resources
- 6
- 8
- 5 October 2026 at 01:27
  Pete
- Warco WM180 Autofeed Speed 1 2
  Started by: James A in: Workshop Tools and Tooling
- 13
- 37
- 4 October 2026 at 22:51
  southernchap
- Metric threads on a Myford super 7 with quick change gearbox?
  Started by: Keith Charters in: Beginners questions
- 6
- 11
- 4 October 2026 at 16:14
  howardb
- Harrison L5 mk2 or not
  Started by: sean logie in: Workshop Tools and Tooling
- 5
- 11
- 4 October 2026 at 15:59
  sean logie

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies