Tom senior M1 Mill overhaul completed

Tom senior M1 Mill overhaul completed

This topic has 7 replies, 4 voices, and was last updated 2 January 2020 at 19:11 by petro1head.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
24 December 2019 at 17:48 #443161
Peter Simpson 1
Participant
@petersimpson1
Overhaul completed, Really enjoyed the last couple of months on the M1 Stripped, cleaned, painted, one motor stripped and rewired for Delta wiring, Two new inverters wired, programmed and tested this afternoon.
Advert

24 December 2019 at 17:48 #9996
Peter Simpson 1
Participant
@petersimpson1
24 December 2019 at 17:52 #443162
Emgee
Participant
@emgee
Machine looks very good, are all ways nice and smooth ?

Emgee
24 December 2019 at 17:58 #443165
Peter Simpson 1
Participant
@petersimpson1
Yes they feel really nice, Powering the table both ways with the main motor via an inverter feels smooth and quiet, Minimal back lash on all leadscrews.
24 December 2019 at 18:00 #443166
Peter Simpson 1
Participant
@petersimpson1
Yes they feel really nice, Powering the table both ways with the main motor via an inverter feels smooth and quiet, Minimal back lash on all leadscrews.
26 December 2019 at 09:24 #443313
Mark Gould 1
Participant
@markgould1
Looks gorgeous Peter, well done!
26 December 2019 at 18:04 #443394
Peter Simpson 1
Participant
@petersimpson1
Thanks Mark, I used Paragon's Tom Senior paint. Brush paints very well, although it is expensive.
2 January 2020 at 19:11 #444360
petro1head
Participant
@petro1head
Looks brill

Pitty it fell over

There, now the right way up

Edited By petro1head on 02/01/2020 19:14:53
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Workshop Heaven but must have cost a fortune.
  Started by: alan ord 2 in: Workshop Tools and Tooling
- 3
- 3
- 23 July 2026 at 22:18
  Pete
- REXON SS16A scroll saw
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 6
- 23 July 2026 at 22:13
  Michael Gilligan
- What Did You Do Today 2026 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 43
- 152
- 23 July 2026 at 21:50
  Nigel Graham 2
- Mitutoyo Metrology Handbook – Still Available From Mitutoyo UK
  Started by: southernchap in: Books
- 3
- 6
- 23 July 2026 at 21:46
  Robert Atkinson 2
- It’s A Compressor, Jim, But Not… 1 2
  Started by: Nigel Graham 2 in: General Questions
- 12
- 30
- 23 July 2026 at 21:17
  Nigel Graham 2
- Deep drilling
  Started by: Speedy Builder5 in: Workshop Techniques
- 6
- 8
- 23 July 2026 at 18:23
  JasonB
- Chat GPTgoes rogue and launches cyber attack
  Started by: Robert Atkinson 2 in: The Tea Room
- 7
- 8
- 23 July 2026 at 17:42
  noel shelley
- Nut screws washer and bolts – you know the old joke
  Started by: Kiwi Bloke in: General Questions
- 15
- 21
- 23 July 2026 at 16:44
  Howard Lewis
- Dart 7 1/4 Build
  Started by: Roy Birch in: Locomotives
- 1
- 1
- 23 July 2026 at 14:25
  Roy Birch
- Is anyone interested in developping a new series of model engines? 1 2 3 4
  Started by: paulmichael1084 in: General Questions
- 19
- 76
- 23 July 2026 at 13:24
  JasonB
- Electronics EL714-C DRO Display
  Started by: houstonceng in: Workshop Tools and Tooling
- 2
- 3
- 23 July 2026 at 13:16
  houstonceng
- Mechanical lubrication steam locos. Non return valve opening pressure
  Started by: peter allen 1 in: General Questions
- 7
- 14
- 23 July 2026 at 10:28
  noel shelley
- BlueBerries
  Started by: Michael Gilligan in: The Tea Room
- 13
- 22
- 23 July 2026 at 02:10
  Grindstone Cowboy
- Bridgeport Series 1 CNC 1 2 3 4
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 76
- 23 July 2026 at 00:47
  seemack
- Help needed: Custom turned steering rack plug (Derbyshire / DE4)
  Started by: darikde4 in: General Questions
- 3
- 3
- 22 July 2026 at 23:03
  paulmichael1084
- Hi folks – the answer to everything is 42
  Started by: hughgee42 in: Introduce Yourself – New members start here!
- 2
- 2
- 22 July 2026 at 16:59
  jaCK Hobson
- Face Drive Pins
  Started by: Michael Gilligan in: Materials
- 5
- 7
- 22 July 2026 at 14:24
  bernard towers
- Unusual Crawford Collets and where to test them
  Started by: Rainbows in: Workshop Tools and Tooling
- 1
- 1
- 22 July 2026 at 13:32
  Rainbows
- Posts by new member containing ads.
  Started by: alecs in: Website Questions, Comments, and Suggestions
- 5
- 8
- 22 July 2026 at 11:40
  bernard towers
- Panasonic Hard Disk Recorder
  Started by: Michael Gilligan in: Electronics in the Workshop
- 1
- 1
- 21 July 2026 at 22:48
  Michael Gilligan
- Using an emergency collet
  Started by: Dell in: Workshop Tools and Tooling
- 8
- 17
- 21 July 2026 at 15:13
  Dell
- Small 3D Metal Printed Part
  Started by: Julie Ann in: 3D Printers and 3D Printing
- 6
- 10
- 21 July 2026 at 10:34
  Julie Ann
- Help please! Workshop clearance 1 2
  Started by: ksw in: General Questions
- 13
- 31
- 20 July 2026 at 23:54
  Bill Phinn
- Cormak TU2807v gearing issues
  Started by: paul_go in: General Questions
- 2
- 7
- 20 July 2026 at 21:14
  paul_go
- Help ID’ing Round Carbide Insert and Finding a Supplier 1 2
  Started by: Jon Gibbs in: Workshop Tools and Tooling
- 10
- 37
- 20 July 2026 at 17:02
  ega

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies