1.5″ x 12tpi Mandrel?

This topic has 3 replies, 3 voices, and was last updated 13 November 2023 at 14:18 by Andrew Tinsley.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
12 November 2023 at 15:40 #689962
Andrew Tinsley
Participant
@andrewtinsley63637
I have a chuck with a 1.5″ x 12tpi backplate. Just curious to know what ;athes have this size mandrel thread?

Andrew.
Advert

13 November 2023 at 13:36 #690198
mike robinson 2
Participant
@mikerobinson2
I think it could be from a Boxford, although which model I dont know, maybe AUD ? Others will give you the definitive info.
13 November 2023 at 14:07 #690206
Bazyle
Participant
@bazyle
All (older) models of the Boxford are the same but are Whitworth while the mostly similar looking SouthBend are UNC. So a Boxford one screws into a SB nose but not visa versa.
13 November 2023 at 14:18 #690207
Andrew Tinsley
Participant
@andrewtinsley63637
Hello Mike,

The Boxford mandrel thread is certainly 1.5″ diameter, but is 8 tpi not the 12 tpi on the chuck backplate of this chuck.

Thanks,

Andrew.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Homeworkshop Ads down?
  Started by: Andrew Tinsley in: General Questions
- 3
- 3
- 17 August 2026 at 20:04
  Mark Rand
- What the hell is going on with the suppliers??? 1 2
  Started by: Hollowpoint in: General Questions
- 23
- 43
- 17 August 2026 at 19:40
  Bazyle
- turning long small diameters
  Started by: Speedy Builder5 in: Workshop Techniques
- 5
- 6
- 17 August 2026 at 18:46
  bernard towers
- two traction engines
  Started by: gary in: Traction engines
- 2
- 2
- 17 August 2026 at 18:16
  JasonB
- What is this symbol ?
  Started by: paul1956 in: Beginners questions
- 12
- 20
- 17 August 2026 at 17:06
  Bazyle
- Stuart Beam Piston 1 2
  Started by: Chris Taylor 3 in: Beginners questions
- 12
- 30
- 17 August 2026 at 17:05
  Chris Taylor 3
- Bridge collapse
  Started by: JA in: The Tea Room
- 5
- 5
- 17 August 2026 at 16:59
  peak4
- Jowitt Major Completion
  Started by: JasonB in: Stationary engines
- 1
- 2
- 17 August 2026 at 16:52
  JasonB
- Chronos closing down.
  Started by: Andrew Tinsley in: General Questions
- 4
- 4
- 17 August 2026 at 16:31
  paul1956
- Self dimming welding mask
  Started by: Andrew Tinsley in: General Questions
- 13
- 20
- 17 August 2026 at 16:14
  Nicholas Farr
- Myford 254 Plus toolpost type 1 2
  Started by: Dave Wootton in: Workshop Tools and Tooling
- 11
- 33
- 17 August 2026 at 15:24
  duncan webster 1
- What Did You Do Today 2026 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 43
- 163
- 17 August 2026 at 13:53
  Nigel Graham 2
- Parting off 1 2
  Started by: Peter Simpson 3 in: Beginners questions
- 17
- 27
- 17 August 2026 at 13:46
  vintagengineer
- Best for BA Fasteners
  Started by: Charles Lamont in: Materials
- 6
- 6
- 17 August 2026 at 13:36
  bernard towers
- Event and Access Changes due to Fire Risk
  Started by: Neil Wyatt in: Model engineering club news
- 2
- 2
- 17 August 2026 at 13:35
  Nigel Graham 2
- Steam pressure guages
  Started by: Peter Venn in: General Questions
- 8
- 10
- 17 August 2026 at 13:29
  Nigel Graham 2
- Tools you hate using or just don’t get on with? 1 2 3
  Started by: Hollowpoint in: General Questions
- 35
- 73
- 17 August 2026 at 11:05
  peak4
- Myford S7 MKI lubrication spindle bearing
  Started by: Werner Habbel in: Manual machine tools
- 1
- 1
- 17 August 2026 at 09:50
  Werner Habbel
- Lidl Parkside drill bit sharpener 1 2
  Started by: AJW in: Workshop Tools and Tooling
- 16
- 28
- 16 August 2026 at 22:10
  peak4
- Preview of whats coming in Freecad 26.3
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 1
- 1
- 16 August 2026 at 20:21
  Russell Eberhardt
- How much has AI affected you personally so far? 1 2
  Started by: Robin Graham in: The Tea Room
- 23
- 32
- 16 August 2026 at 16:24
  Mark Rand
- Name Plate Recreated.
  Started by: JasonB in: Work In Progress and completed items
- 5
- 9
- 16 August 2026 at 16:10
  Bill Phinn
- When is a threaded insert preferable to tapping directly into aluminum?
  Started by: elowen01 in: General Questions
- 16
- 19
- 16 August 2026 at 10:41
  HOWARDT
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 327
- 15 August 2026 at 16:02
  Phil Whitley
- ELLIE the steam tram book – wanted
  Started by: apprentice in: Help and Assistance! (Offered or Wanted)
- 4
- 5
- 15 August 2026 at 13:38
  apprentice

1.5″ x 12tpi Mandrel?

1.5″ x 12tpi Mandrel?

Latest Replies

Latest Issue

August 2026

Newsletter Sign-up

Latest Replies