1.5″ x 12tpi Mandrel?

This topic has 3 replies, 3 voices, and was last updated 13 November 2023 at 14:18 by Andrew Tinsley.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
12 November 2023 at 15:40 #689962
Andrew Tinsley
Participant
@andrewtinsley63637
I have a chuck with a 1.5″ x 12tpi backplate. Just curious to know what ;athes have this size mandrel thread?

Andrew.
Advert

13 November 2023 at 13:36 #690198
mike robinson 2
Participant
@mikerobinson2
I think it could be from a Boxford, although which model I dont know, maybe AUD ? Others will give you the definitive info.
13 November 2023 at 14:07 #690206
Bazyle
Participant
@bazyle
All (older) models of the Boxford are the same but are Whitworth while the mostly similar looking SouthBend are UNC. So a Boxford one screws into a SB nose but not visa versa.
13 November 2023 at 14:18 #690207
Andrew Tinsley
Participant
@andrewtinsley63637
Hello Mike,

The Boxford mandrel thread is certainly 1.5″ diameter, but is 8 tpi not the 12 tpi on the chuck backplate of this chuck.

Thanks,

Andrew.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Vintage instructions wanted
  Started by: Chris Kirby 1 in: Help and Assistance! (Offered or Wanted)
- 3
- 3
- 14 November 2026 at 17:25
  Dave Halford
- Emco Compact 5 Modifications 1 2 … 5 6
  Started by: Graham Meek in: Manual machine tools
- 14
- 141
- 14 November 2026 at 17:09
  Graham Meek
- Air Conditioning portable unit
  Started by: BOB BLACKSHAW 1 in: The Tea Room
- 7
- 10
- 14 November 2026 at 16:19
  Martin Connelly
- Myford
  Started by: Michael Gilligan in: Manual machine tools
- 10
- 18
- 14 November 2026 at 14:24
  Andrew Tinsley
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 339
- 14 November 2026 at 11:51
  Phil Whitley
- Hello everyone
  Started by: point.two.five in: Introduce Yourself – New members start here!
- 6
- 15
- 14 November 2026 at 09:32
  point.two.five
- WANTED: Boxford 280T / X10 series metric threading unit internals
  Started by: leeboxford280t in: Manual machine tools
- 3
- 3
- 14 November 2026 at 09:23
  John Hinkley
- LAzar egde finder
  Started by: ian Holdsworth in: Beginners questions
- 13
- 18
- 13 November 2026 at 21:27
  Paul Lousick
- What Did You Do Today 2026 1 2 … 10 11
  Started by: JasonB in: The Tea Room
- 56
- 255
- 13 November 2026 at 18:22
  Nigel Graham 2
- injector pipe size
  Started by: Garry Coles in: General Questions
- 3
- 3
- 13 November 2026 at 17:32
  Nigel Graham 2
- Parting off 1 2 3
  Started by: Peter Simpson 3 in: Beginners questions
- 23
- 53
- 13 November 2026 at 15:37
  Geoff Dunsby
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 14
- 19
- 13 November 2026 at 14:16
  bernard towers
- Help Clarke CL430 Lathe feed coupling 1 2
  Started by: daz996 in: Beginners questions
- 12
- 30
- 13 November 2026 at 11:36
  5sahib
- Micrometer ratchets 1 2
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 16
- 30
- 13 November 2026 at 06:47
  Speedy Builder5
- Dopiest question ever…how to use a bin?
  Started by: Ian Parkin in: The Tea Room
- 8
- 14
- 12 November 2026 at 23:04
  not done it yet
- Greenbat 3 ton battery loco
  Started by: Pippin in: Work In Progress and completed items
- 3
- 5
- 12 November 2026 at 17:25
  renardiere7
- Brake shoe castings and forming a lip in sheet steel
  Started by: Pippin in: Help and Assistance! (Offered or Wanted)
- 3
- 3
- 12 November 2026 at 12:20
  bernard towers
- Annoying advert 1 2
  Started by: Dalboy in: The Tea Room
- 20
- 34
- 12 November 2026 at 10:57
  JasonB
- Coventry Diehead CH Reassembly
  Started by: Tony Ray in: Workshop Tools and Tooling
- 4
- 14
- 12 November 2026 at 08:16
  Jan Raap
- Impact Bits
  Started by: Vic in: Workshop Tools and Tooling
- 5
- 7
- 11 November 2026 at 18:31
  old mart
- Close-coupled Tees (Underfloor heating)
  Started by: Andy Stopford in: The Tea Room
- 7
- 16
- 11 November 2026 at 17:07
  Andy Stopford
- 3d Printed Carriage Stop for Warco WM180 1 2
  Started by: James A in: Workshop Tools and Tooling
- 13
- 26
- 11 November 2026 at 14:55
  JasonB
- Kirimoto CAM
  Started by: Geoff Dunsby in: CAD – Technical drawing & design
- 3
- 14
- 11 November 2026 at 09:28
  JasonB
- Onshape Learning
  Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
- 6
- 18
- 10 November 2026 at 17:23
  BOB BLACKSHAW 1
- My adventures with a bench top CNC mill 1 2 3 4
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 84
- 10 November 2026 at 12:07
  John Hinkley

1.5″ x 12tpi Mandrel?

1.5″ x 12tpi Mandrel?

Latest Replies

Latest Issue

November 2026

Newsletter Sign-up

Latest Replies