Hall effect sensor

Hall effect sensor

This topic has 4 replies, 4 voices, and was last updated 26 November 2020 at 20:30 by Grizzly bear.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
25 November 2020 at 19:57 #27790
Arthur Goodwin
Participant
@arthurgoodwin45738
From ebay
Advert

25 November 2020 at 19:57 #509858
Arthur Goodwin
Participant
@arthurgoodwin45738
Hi

I have purchased an hall effect sensor and display unit from ebay.

The instructions are in chinese and the vendor has been no use at all.

Has any body got a wiring diagram that i could use

Thanks
25 November 2020 at 20:08 #509861
Mike Poole
Participant
@mikepoole82104
There are a few different versions, I am guessing the sensor has three wires brown/blue/black. Brown is positive blue is negative and black is the output, the display will also need the same supply. A picture of what you have will help.

Mike
25 November 2020 at 20:13 #509865
JasonB
Moderator
@jasonb
If it's a tacho then the 5 connections to the ribbon wire are
26 November 2020 at 20:30 #510063
Grizzly bear
Participant
@grizzlybear
Any use?

Introduction Hall Effect Switches Sensors Circuits Tutorial (bristolwatch.com)

Bear..
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Annealing extruded acrylic
  Started by: Mick Bailey in: Materials
- 1
- 1
- 25 August 2026 at 09:49
  Mick Bailey
- Survival Challenge TV for engineers!
  Started by: Neil Wyatt in: The Tea Room
- 9
- 9
- 25 August 2026 at 09:16
  bernard towers
- Myford Lathe Identification
  Started by: Captain Barnacles in: Manual machine tools
- 8
- 14
- 25 August 2026 at 08:40
  Howard Lewis
- All things Beaver Mill 1 2 … 9 10
  Started by: Robert James 3 in: Manual machine tools
- 43
- 238
- 25 August 2026 at 05:37
  Lex Davis
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 20
- 25 August 2026 at 05:00
  Peter Hoerlein
- Modifying the OKMO P51 Friction Clutch for a Model Steam Engine
  Started by: Blue Heeler in: Work In Progress and completed items
- 1
- 1
- 25 August 2026 at 01:20
  Blue Heeler
- Chronos closing down. 1 2 3
  Started by: Andrew Tinsley in: General Questions
- 31
- 70
- 24 August 2026 at 19:47
  Mark Rand
- Ketan Swali 1 2
  Started by: Bill Davies 2 in: The Tea Room
- 41
- 47
- 24 August 2026 at 17:55
  old mart
- What parting off tool and how to get parallel faces?
  Started by: interferencefit in: Beginners questions
- 14
- 20
- 24 August 2026 at 17:31
  old mart
- Nameplate Identification
  Started by: onarion67 in: Workshop Techniques
- 3
- 7
- 24 August 2026 at 16:13
  onarion67
- How much has AI affected you personally so far? 1 2
  Started by: Robin Graham in: The Tea Room
- 23
- 36
- 24 August 2026 at 11:19
  Michael Gilligan
- Bridge collapse 1 2
  Started by: JA in: The Tea Room
- 13
- 28
- 24 August 2026 at 09:19
  Adrian R2
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 3
- 6
- 24 August 2026 at 09:09
  Michael Gilligan
- Parting off 1 2
  Started by: Peter Simpson 3 in: Beginners questions
- 19
- 40
- 24 August 2026 at 09:07
  ega
- Identifying Moore and Wright Notched Calipers
  Started by: Thomas Wilshaw in: Workshop Tools and Tooling
- 6
- 7
- 23 August 2026 at 20:51
  old mart
- Hydrostatic Transmission by Mike Tilby
  Started by: Ronald Wagner in: Model Engineer & Workshop
- 4
- 9
- 23 August 2026 at 20:44
  duncan webster 1
- Uniflow engine
  Started by: AStroud in: Work In Progress and completed items
- 2
- 2
- 23 August 2026 at 18:55
  JasonB
- GRAVOGRAPH AF3
  Started by: Speedy Builder5 in: Workshop Tools and Tooling
- 2
- 3
- 23 August 2026 at 11:56
  Michael Gilligan
- Small 3D Metal Printed Part
  Started by: Julie Ann in: 3D Printers and 3D Printing
- 6
- 11
- 23 August 2026 at 09:02
  Julie Ann
- Bridgeport Series 1 CNC 1 2 3 4
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 83
- 23 August 2026 at 01:28
  seemack
- My latest
  Started by: Windy in: The Tea Room
- 1
- 1
- 23 August 2026 at 01:25
  Windy
- AI will make things safer in the future
  Started by: old mart in: The Tea Room
- 10
- 20
- 22 August 2026 at 20:12
  Andy Stopford
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 328
- 22 August 2026 at 18:01
  Phil Whitley
- JCB and Hydrogen Power
  Started by: Neil A in: The Tea Room
- 13
- 22
- 22 August 2026 at 09:53
  JA
- Drill grinders/sharpeners and their capabilities
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 8
- 19
- 22 August 2026 at 08:05
  Howard Lewis

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies