How Best to Sell a Clarkson Cutter Grinder & Accessories?

This topic has 12 replies, 9 voices, and was last updated 26 July 2020 at 14:06 by Sawdust.

Viewing 13 posts - 1 through 13 (of 13 total)

Author

Posts
24 July 2020 at 23:41 #487479
Sawdust
Participant
@sawdust82968
Hi guys. I've been left (judging by the Lathes.co.uk page) a Clarkson Mk 2 or 3 (large column) cutter grinder and very comprehensive looking set of accessories by a deceased UK toolmaking friend who lived here in Ireland – and would appreciate hearing some thoughts on how best to go about selling it in the UK. (very small market here)

I thought of using it as a plane blade and chisel grinder (my interest is primarily woodworking), but it would be overkill. It probably runs too fast for heat sensitive carbon steel blades anyway.

It'd be nice to see it go to a good home.

My friend used it very occasionally to grind cutters until about 8 years ago. It so far as I know was running fine when last used.

It seems sound, but isn't squeaky clean – some of the accessories especially have light surface rust as a consequence of it having been stored in an unheated workshop.

I'm happy to put time into taking and forwarding lots of photos and answering specific questions in the event of a serious interest.

It's also likely that I could transport it to the UK and meet a buyer (the deal would need to be done in advance however), although meeting in the midlands or thereabouts would make life a lot easier.

Thoughts?

Thank you
Advert

24 July 2020 at 23:41 #27536
Sawdust
Participant
@sawdust82968
25 July 2020 at 07:35 #487494
Pete Rimmer
Participant
@peterimmer30576
For the best return you could list each part separately on eBay. The late clarksons are well sought after and the accessories make very good money. Most of the tool dealers sell the machine bare and the accessories separately because of the money they make.

If you're keen that it should all go in one package and want some valuation advice post the photos in your album here and see what people say. Expect to get a raft of personal messages from people trying to cherry-pick the high value stuff though.

If you're going to sell it complete then http://www.homeworkshop.co.uk is a great place to list it for free.

P.S for your chisels look around for a viceroy sharpedge.

Edited By Pete Rimmer on 25/07/2020 07:36:39
25 July 2020 at 07:48 #487496
Lee Rogers
Participant
@leerogers95060
Posted by Pete Rimmer on 25/07/2020 07:35:31:

For the best return you could list each part separately on eBay. The late clarksons are well sought after and the accessories make very good money. Most of the tool dealers sell the machine bare and the accessories separately because of the money they make.

If you're keen that it should all go in one package and want some valuation advice post the photos in your album here and see what people say. Expect to get a raft of personal messages from people trying to cherry-pick the high value stuff though.

If you're going to sell it complete then http://www.homeworkshop.co.uk is a great place to list it for free.

P.S for your chisels look around for a viceroy sharpedge.

The link is to a domain name seller.

Edited By Pete Rimmer on 25/07/2020 07:36:39
25 July 2020 at 08:26 #487499
not done it yet
Participant
@notdoneityet
The link is to a domain name seller.

Does that mean it is a posting by a spamming advertiser? Advertising for free?
25 July 2020 at 08:28 #487501
Michael Gilligan
Participant
@michaelgilligan61133
Posted by Lee Rogers on 25/07/2020 07:48:11:

.

The link is to a domain name seller.

.

Try this one: **LINK**

https://www.homeworkshop.org.uk

MichaelG.
25 July 2020 at 08:32 #487502
Michael Gilligan
Participant
@michaelgilligan61133
Posted by not done it yet on 25/07/2020 08:26:08:

The link is to a domain name seller.

Does that mean it is a posting by a spamming advertiser? Advertising for free?

.

No … it means that Pete innocently typed the address slightly wrong

MichaelG.
25 July 2020 at 12:24 #487541
Sawdust
Participant
@sawdust82968
Thank you very much for the thoughts guys.

I should say by the way that while I've only posted occasionally that I've been a background member that looks in occasionally for some years – the current ID is new. The email address it was based on was with a long defunct service provider, it finally stopped working some time ago.

The good news is that it sounds like there's a ready market. Breaking up the set needs a bit of thought re. how my friend might feel about it, but sounds as though it's the way to maximise the return.

I don't know if people regrind cutters as a business undertaking any more (the market is perhaps mostly hobby based?), but a buyer with that in mind would probably need a comprehensive set of accessories.

Next step I guess is to wait for a nice dry day, then lay out, inventory and photograph the hardware.
25 July 2020 at 22:26 #487633
Mark Rand
Participant
@markrand96270
Personally, I would say that splitting the grinder and all of the attachments out separately is sharp practice and I would not buy from such a seller.

The grinder on it's own is almost worthless without the associated attachments, despite the prices asked for them,
26 July 2020 at 08:42 #487654
Dave Wootton
Participant
@davewootton
If you want to sell as one lot it's perhaps worth thinking about an advert on the Lathes.co.uk website, Tony Griffiths will look at the pictures and catalogue everything there and compile an advert for you with a suggested valuation. There is obviously a charge, but when I had to help clear a friends workshop full of clockmaking tools and machinery it proved invaluable.

Those of us doing the clearing, all model engineers, were baffled by some of the attachments used by ornamental turners, tony identified them all and we raised a considerable amount for the widow. We got involved after a dealer offered an absolute paltry sum for the whole workshop, fortunately the family were astute enough to realise that it must be worth more than the few hundred pounds offered. In the end close to five thousand was raised.

One thing we did find that if emailing pictures to tony it's best to ring and draw attention to the fact, I gather he is rather busy and can miss them. no connection with his site but a very satisfied customer.

Dave

Sorry about all the editing! no coffee yet.

Edited By Dave Wootton on 26/07/2020 08:43:31

Edited By Dave Wootton on 26/07/2020 08:44:48

Edited By Dave Wootton on 26/07/2020 08:49:21
26 July 2020 at 09:14 #487662
Gerard O’Toole
Participant
@gerardotoole60348
Posted by Sawdust on 24/07/2020 23:41:00:

Hi guys. I've been left …a Clarkson Mk 2 or 3 (large column) cutter grinder …. how best to go about selling it in the UK. (very small market here)

…..

Thank you

Have you tried to sell it in Ireland? While the market is small , my experience, trying to buy a small lathe, is that there is a dearth of items for sale. Perhaps there is someone out there who would be interested?

Edited By Gerard O’Toole on 26/07/2020 09:14:52
26 July 2020 at 09:15 #487663
Baz
Participant
@baz89810
Mark, it is my experience that most dealers split items up to maximise profits, it’s just the way they do business. A dealer will argue that a customer will want to buy a basic machine and add what accessories he requires at time of purchase and then buy what he needs as he needs it.
26 July 2020 at 14:06 #487721
Sawdust
Participant
@sawdust82968
Thanks again guys, more good suggestions. Sounds like the lathes.co.uk service would be well worth paying for Dave – it's such a well known site.

I suppose as ever it's profit versus other considerations. It'd seem a pity to split up a functional set (i.e. the basis of a multi capability cutter regrinding business or other operation), but the other side of the coin as Baz says is perhaps that many especially hobby buyers really only want to pay for what they immediately need.

I will try a local advert Gerard. It's a matter of ships in the night I suppose. It'd save a lot of complications if it worked out though…

Edited By Sawdust on 26/07/2020 14:08:59
Author

Posts