Helping dad

This topic has 8 replies, 6 voices, and was last updated 24 August 2017 at 14:08 by Thor 🇳🇴.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
18 June 2017 at 10:24 #303029
Eric Cox
Participant
@ericcox50497
The concept was that Stew Hart would produce three models that could be built by younger model engineers in the summer school holidays. Two models were published and the school holidays are here again so where is the third model?.
Advert

18 June 2017 at 10:24 #25310
Eric Cox
Participant
@ericcox50497
18 June 2017 at 10:32 #303032
JasonB
Moderator
@jasonb
Well You have not been looking in the right places, I have seen a build thread by Stew and also at least one other example of the beam engine built to his design. If you ask nicely I'm sure Stew will send you the drawings if you can't find them to download.
18 June 2017 at 11:02 #303033
Eric Cox
Participant
@ericcox50497
I thought the right place to look was the magazine as I expected it to be published like the other two
18 June 2017 at 12:36 #303044
Neil Wyatt
Moderator
@neilwyatt
Strew is on the forum, Perhaps he just hasn't written up number 3 yet?

http://www.model-engineer.co.uk/forums/postings.asp?th=110372

Neil
18 June 2017 at 13:25 #303051
Weary
Participant
@weary
This posting by Stewart Hart seems relevant:

Eric Cox: Stewart, is the grass hopper ready for publication yet ?.

Stewart Hart: Hi Eric

I submitted the Grasshopper article over 12 months ago for some reason its not been published, and as it was written as a follow on from the other two engines, the passing of time has taken that link away so it will need a re-write so that it will now stand alone, I'm not sure if it will be worth my time doing this.

Any way I've sent you the drawings and a link to a drop box with the article in it.

Any problems just drop me an email.

Cheers

Stew

Reference thread. posting 15/06/2017 11:21:36

All eyes swivel toward Diane Carney!!

Would certainly be nice to see this construction series of a relatively rarely modelled type of stationary engine,

Regards,

Phil

Edited By Weary on 18/06/2017 13:27:35
18 June 2017 at 14:44 #303061
Neil Wyatt
Moderator
@neilwyatt
I'm sure that, like me, Diane has a stock of articles in hand and she won't want too many series on the same subject 9stationary engines) and/or the same author at the expense of allowing other people's articles to take their turn.

I know she has stated on here the Grasshopper will appear in due course.

Neil
23 August 2017 at 15:33 #313587
david curtis 1
Participant
@davidcurtis1
can someone advise me which magazine numbers contain the series on building the mill engine i have 4460 the introduction but would like to purchase the remaining magazines
24 August 2017 at 14:08 #313738
Thor 🇳🇴
Participant
@thor
Hi David,

According to this ME index (I searced for Hart Mill Engine), issues: 4460, 4462, 4464, 4466, 4468, 4470, 4472, 4474, 4476. I hope this helps.

Thor

Edited By Thor on 24/08/2017 14:10:34
Author

Posts