stuart turner

This topic has 11 replies, 4 voices, and was last updated 8 December 2015 at 10:14 by phil burley.

Viewing 12 posts - 1 through 12 (of 12 total)

Author

Posts
5 December 2015 at 14:19 #215189
phil burley
Participant
@philburley12227
hello has anyone built up the beam engine governor kit ? I have the casting set but no instructions . I am working on the crankshaft and it would be useful to know how big the pulley needs to be . ( be useful to know how to put it together !!!!!! a plan would be the answer &nbsp

regards Phil
Advert

5 December 2015 at 14:19 #24259
phil burley
Participant
@philburley12227
governor
5 December 2015 at 15:52 #215198
Steve Withnell
Participant
@stevewithnell34426
The Stuart Governor kit is a one size fits all affair, so don't want to part with my plans, but here is the crankshaft pulley to keep you going –

Steve
5 December 2015 at 16:55 #215204
JasonB
Moderator
@jasonb
Goes together so it looks like this

Don't have my drawings anymore but you should be able to buy a set from Stuarts

Edited By JasonB on 05/12/2015 17:00:03
5 December 2015 at 17:10 #215205
Steve Withnell
Participant
@stevewithnell34426
Or this (showing off my new 'embed' skills) my Victoria version:

I've found the source of the knocking, it's the big end! Will fix it one day…
5 December 2015 at 18:09 #215208
phil burley
Participant
@philburley12227
thanks for the information , I havn't tried Stuart's because the plans aren't listed anywhere but an email might find out if they are available
5 December 2015 at 18:21 #215209
JasonB
Moderator
@jasonb
Bottom of page has the governor drawings
6 December 2015 at 08:59 #215249
phil burley
Participant
@philburley12227
oh great thanks , why couldn't I find that !!!!!
6 December 2015 at 12:58 #215296
DMB
Participant
@dmb
Jason and Steve,
You both have got models showing good workmanship – how about putting them in 2016 MEX? Let’s all have a close up gawp.
Regards,
John
6 December 2015 at 13:08 #215300
Steve Withnell
Participant
@stevewithnell34426
Posted by DMB on 06/12/2015 12:58:32:
Jason and Steve,
You both have got models showing good workmanship – how about putting them in 2016 MEX? Let's all have a close up gawp.
Regards,
John

Thanks for the kind remarks John. When I finally give up working for a living I might just do that. There is a few things need finishing off on the Victoria though that I haven't got around to.

Anything I've done of any merit is on Youtube, and can be found by searching "swithnell".

Steve
6 December 2015 at 13:18 #215302
JasonB
Moderator
@jasonb
I have already mentioned a "moderators models" display to Neil for 2016 though don't think the beam will be amoung my models, it's a bit old now and would take too long to get the dust off
8 December 2015 at 10:14 #215564
phil burley
Participant
@philburley12227
plan sent overnight from Stuart Models . that's good service
Author

Posts