Hi,

I have an 80mm dia. Facing milling cutter with 7 insert locations.

It came to me in a box with a lot of tooling at a local auction a couple of years ago. I have just got to the bottom of the box recently and it was a pleasant surprise as it is in excellent condition, BUT there are no tips to fit it, but the screws are there and don't look as if they have been used!

The only identification is the code A241.80.R.07 The rectangular tips look to be about 12mm x 8mm x 5mm thick with a 3.5mm screw hole. (These sizes are approx)

I have been in contact with several tooling suppliers but as yet none of them can identify what tips I need. I may have to go to a few suppliers and ask to see if I can get something to fit, but perhaps some of the very knowledgeable folks on this forum can identify what I need.

Thanks, SDL.

That solved the problem.

The information available on this Forum is second to none!

Tips ordered first thing this morning and they are on their way,

Thanks.