proxxon micro torch burner thread size?

proxxon micro torch burner thread size?

This topic has 2 replies, 2 voices, and was last updated 1 May 2019 at 23:15 by Keith Petley.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
1 May 2019 at 20:08 #19327
Ian Welford
Participant
@ianwelford58739
Advert

1 May 2019 at 20:08 #407393
Ian Welford
Participant
@ianwelford58739
Ok I’ve been clumsy, the micro burner torch dropped off the shelf, bounced off the vice and landed on the floor. Sadly the end of the torch hit the vice and the nozzle inside which is threaded sheared . The nozzle Which I thought was integral with the shroud isn’t! But I need to know what thread it is to make a new shaft.

I contacted proxxon who don’t sell the nuzzles separately due to security concerns(????). Now from measuring the thread on the bit snapped off I think itsM4 fine but not sure WHICH M4 fine and , surprise surprise Proxxon won’t tell me.

Anyone got any ideas? Currently I plan on taking it along to donny to see if I can get. tap to fit and the. buy it and the relevant die.

Surprised how unhelpful Proxxon were about this. The torch is otherwise very high grade and a delight to use, just a bit fragile.

Ian
1 May 2019 at 23:15 #407416
Keith Petley
Participant
@keithpetley53472
Apart from the colour the Proxxon device appears visually the same as the Rokrow RK2050.

**LINK**

Rokrow spares may be easier to find (or maybe not… )

Keith
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Newall DRO Adjustment
  Started by: Metalhacker in: Help and Assistance! (Offered or Wanted)
- 7
- 11
- 14 May 2025 at 10:18
  Metalhacker
- Degreasing internal 3mm thread
  Started by: Mike Quinn 1 in: Beginners questions
- 9
- 10
- 14 May 2025 at 10:13
  Andrew Crow
- Stuart No8 drawings
  Started by: mark roberts 7 in: Beginners questions
- 2
- 2
- 14 May 2025 at 09:55
  JasonB
- magnetic chuck for milling machine
  Started by: aytact in: General Questions
- 10
- 10
- 14 May 2025 at 08:42
  Chris Crew
- S&B Sabel lathe quick change tool post
  Started by: gerry45 in: Beginners questions
- 9
- 16
- 14 May 2025 at 08:11
  Pete
- fly cutter bit
  Started by: aytact in: General Questions
- 5
- 5
- 14 May 2025 at 07:25
  JasonB
- 3 1/2” gauge diesel loco?
  Started by: Paul McDonough in: Locomotives
- 5
- 13
- 14 May 2025 at 07:22
  JasonB
- Help for DIY lathe build. 1 2
  Started by: moogie in: Help and Assistance! (Offered or Wanted)
- 16
- 28
- 14 May 2025 at 06:56
  larry phelan 1
- Fuel resistant adhesive/sealant? 1 2
  Started by: Fulmen in: Related Hobbies including Vehicle Restoration
- 13
- 26
- 14 May 2025 at 06:00
  not done it yet
- The Honest John motoring website & forum will close in about 5 days.
  Started by: howardb in: The Tea Room
- 3
- 4
- 14 May 2025 at 00:03
  howardb
- Any good at mathematics, I need some help.
  Started by: moogie in: Help and Assistance! (Offered or Wanted)
- 6
- 11
- 13 May 2025 at 22:42
  moogie
- “What about the drains in Finchley?”
  Started by: Plasma in: The Tea Room
- 8
- 15
- 13 May 2025 at 22:13
  Plasma
- Serious Sun-Glass 1 2
  Started by: Michael Gilligan in: The Tea Room
- 17
- 37
- 13 May 2025 at 22:09
  V8Eng
- What Did You Do Today 2025 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 28
- 111
- 13 May 2025 at 18:07
  duncan webster 1
- DC Wasp Rebuild
  Started by: William Chitham in: I/C Engines
- 7
- 17
- 13 May 2025 at 17:50
  Ramon Wilson
- Old Radio Book
  Started by: old fool in: Books
- 5
- 5
- 13 May 2025 at 17:18
  john fletcher 1
- How to make tommy bar nuts?
  Started by: Ian Parkin in: General Questions
- 9
- 13
- 13 May 2025 at 16:21
  Ian Parkin
- Boxford Model A back gear
  Started by: jilly5599 in: General Questions
- 6
- 17
- 13 May 2025 at 15:11
  Bazyle
- Purpose of pivot on carburettor linkage ? ?
  Started by: Alan Donovan in: Help and Assistance! (Offered or Wanted)
- 5
- 13
- 13 May 2025 at 10:09
  Alan Donovan
- MC2 collet on myford
  Started by: davp1971 in: Beginners questions
- 8
- 14
- 13 May 2025 at 09:38
  noel shelley
- 110v motor – 2.2kw – on a domestic power supply?
  Started by: ell81 in: Beginners questions
- 10
- 13
- 12 May 2025 at 23:16
  Nicholas Farr
- feed reversing lever not engaging
  Started by: manfromthemist in: Beginners questions
- 5
- 15
- 12 May 2025 at 22:35
  Taf_Pembs
- New member looking for help
  Started by: manfromthemist in: Introduce Yourself – New members start here!
- 4
- 5
- 12 May 2025 at 21:00
  SillyOldDuffer
- How many rings per piston?
  Started by: Arthur Jones 2 in: Locomotives
- 13
- 20
- 12 May 2025 at 20:13
  duncan webster 1
- Surface gage recommendation
  Started by: Sonic Escape in: The Tea Room
- 15
- 23
- 12 May 2025 at 19:55
  Pete

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

May 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies