nvr?? switch

nvr?? switch

This topic has 7 replies, 5 voices, and was last updated 29 October 2017 at 16:06 by mark smith 20.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
29 October 2017 at 13:50 #18722
mark smith 20
Participant
@marksmith20
Advert

29 October 2017 at 13:50 #324261
mark smith 20
Participant
@marksmith20
Hi,

I have this dismembered Perform brand cheap wet and dry grinder ,im wanting to use it just to attach some diamond 6" flat lapping discs i have . Problem is the switch has decided to stop working.

It powers on but as soon as you take your finger off the start switch it stops.

I was wondering if this is the right switch from axminster?? is there cheaper anywhere?

**LINK**

dimensions of cut out are slight less on the axminster replacement .The original switch is around 42-43mm x 27mm. There is nothing written on the broken switch . The grinder is 250 watts.

Edited By mark smith 20 on 29/10/2017 13:50:31

Edited By mark smith 20 on 29/10/2017 13:56:25
29 October 2017 at 14:15 #324268
not done it yet
Participant
@notdoneityet
The last NVR switch I bought was from an epay seller. I didn't buy the cheapest available, but it was less than that one. Works OK.
29 October 2017 at 14:24 #324271
Frances IoM
Participant
@francesiom58905
I’ve used the Axminster switch on a grinder without problem – it used to be quite a bit cheaper when I bought it – you can certainly get ones with the same (?standard) fitting for about half that price – often these cheaper models have the additional feature of a link that allows wiring in other safety switches eg gear covers in lathes
29 October 2017 at 15:16 #324276
mark smith 20
Participant
@marksmith20
Thanks for the replies so the specs on the axminster one will work fine on the 1/3hp grinder ??
29 October 2017 at 15:35 #324279
Nicholas Farr
Participant
@nicholasfarr14254
Posted by mark smith 20 on 29/10/2017 15:16:08:

Thanks for the replies so the specs on the axminster one will work fine on the 1/3hp grinder ??

Hi Mark, yes, provided that you don't have an emergency stop or other fail safe switches to wire in.

Regards Nick.

Edited By Nicholas Farr on 29/10/2017 15:39:14
29 October 2017 at 15:37 #324280
John Rudd
Participant
@johnrudd16576
Q answered…..

Edited By John Rudd on 29/10/2017 15:38:17
29 October 2017 at 16:06 #324283
mark smith 20
Participant
@marksmith20
Ok thanks
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Electronics EL714-C DRO Display
  Started by: houstonceng in: Workshop Tools and Tooling
- 2
- 2
- 22 July 2026 at 18:56
  Peter Cook 6
- It’s A Compressor, Jim, But Not…
  Started by: Nigel Graham 2 in: General Questions
- 9
- 18
- 22 July 2026 at 18:52
  duncan webster 1
- Is anyone interested in developping a new series of model engines? 1 2 3
  Started by: paulmichael1084 in: General Questions
- 17
- 59
- 22 July 2026 at 18:09
  JA
- BlueBerries
  Started by: Michael Gilligan in: The Tea Room
- 13
- 21
- 22 July 2026 at 17:19
  Bazyle
- Hi folks – the answer to everything is 42
  Started by: hughgee42 in: Introduce Yourself – New members start here!
- 2
- 2
- 22 July 2026 at 16:59
  jaCK Hobson
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 42
- 148
- 22 July 2026 at 16:28
  jaCK Hobson
- Help needed: Custom turned steering rack plug (Derbyshire / DE4)
  Started by: darikde4 in: General Questions
- 2
- 2
- 22 July 2026 at 16:21
  Nick Hughes
- Bridgeport Series 1 CNC 1 2 3
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 72
- 22 July 2026 at 16:11
  tomcnc
- Face Drive Pins
  Started by: Michael Gilligan in: Materials
- 5
- 7
- 22 July 2026 at 14:24
  bernard towers
- Unusual Crawford Collets and where to test them
  Started by: Rainbows in: Workshop Tools and Tooling
- 1
- 1
- 22 July 2026 at 13:32
  Rainbows
- Posts by new member containing ads.
  Started by: alecs in: Website Questions, Comments, and Suggestions
- 5
- 8
- 22 July 2026 at 11:40
  bernard towers
- Panasonic Hard Disk Recorder
  Started by: Michael Gilligan in: Electronics in the Workshop
- 1
- 1
- 21 July 2026 at 22:48
  Michael Gilligan
- Using an emergency collet
  Started by: Dell in: Workshop Tools and Tooling
- 8
- 17
- 21 July 2026 at 15:13
  Dell
- Mechanical lubrication steam locos. Non return valve opening pressure
  Started by: peter allen 1 in: General Questions
- 7
- 12
- 21 July 2026 at 10:46
  duncan webster 1
- Small 3D Metal Printed Part
  Started by: Julie Ann in: 3D Printers and 3D Printing
- 6
- 10
- 21 July 2026 at 10:34
  Julie Ann
- Help please! Workshop clearance 1 2
  Started by: ksw in: General Questions
- 13
- 31
- 20 July 2026 at 23:54
  Bill Phinn
- Cormak TU2807v gearing issues
  Started by: paul_go in: General Questions
- 2
- 7
- 20 July 2026 at 21:14
  paul_go
- Help ID’ing Round Carbide Insert and Finding a Supplier 1 2
  Started by: Jon Gibbs in: Workshop Tools and Tooling
- 10
- 37
- 20 July 2026 at 17:02
  ega
- Band saw 1 2 3 4
  Started by: Peter Simpson 3 in: Beginners questions
- 25
- 82
- 20 July 2026 at 16:55
  ega
- Gents C7 electric master clock
  Started by: Robert Atkinson 2 in: Clocks and Scientific Instruments
- 5
- 12
- 20 July 2026 at 16:44
  John Haine
- Interactive article on Beam Engines
  Started by: glinscott in: Stationary engines
- 7
- 17
- 20 July 2026 at 14:30
  Journeyman
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 67
- 20 July 2026 at 09:00
  dean clarke 2
- Steam Loco component interconnection diagram
  Started by: Trevor Wood 6 in: Beginners questions
- 5
- 8
- 19 July 2026 at 23:57
  Nigel Graham 2
- Honing cylinder
  Started by: Speedy Builder5 in: Workshop Techniques
- 5
- 9
- 19 July 2026 at 13:12
  Roderick Jenkins
- New comer
  Started by: vgvikram171 in: Introduce Yourself – New members start here!
- 1
- 1
- 18 July 2026 at 20:43
  vgvikram171

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies