vacuum (steam or compressed air)

vacuum (steam or compressed air)

This topic has 3 replies, 2 voices, and was last updated 5 June 2020 at 17:10 by David Bothwell 1.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
5 June 2020 at 15:38 #33611
David Bothwell 1
Participant
@davidbothwell1
vacuum brakes test
Advert

5 June 2020 at 15:38 #477703
David Bothwell 1
Participant
@davidbothwell1
It may be obvious to those in the know! But I wondered if it is possible to test vaccum brakes on compressed air? As opposed to steam in the ejector Any help most gratefully received
5 June 2020 at 16:46 #477716
Brian Baker 2
Participant
@brianbaker2
Greetings, yes just connect the air to the steam line of the ejector, and you will get a useable vacuum.

I have applied the air through the safety valve bush, with a suitable connector.

regards

Brian
5 June 2020 at 17:10 #477723
David Bothwell 1
Participant
@davidbothwell1
Many thanks for that Brian much appreciated
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- ML7 change gear caluclator
  Started by: drnewcomb in: Manual machine tools
- 3
- 4
- 18 October 2026 at 00:26
  drnewcomb
- Pencil Sharpener 1 2
  Started by: Vic in: The Tea Room
- 15
- 27
- 18 October 2026 at 00:04
  southernchap
- Richard B’s Minnie.
  Started by: Richard B in: Traction engines
- 4
- 23
- 17 October 2026 at 22:22
  Richard B
- Coventry die head
  Started by: lug lord in: Workshop Techniques
- 8
- 10
- 17 October 2026 at 21:23
  Julie Ann
- Weight of Myford Super 7 / ML7R
  Started by: Andrew Tinsley in: General Questions
- 6
- 11
- 17 October 2026 at 21:06
  Zan
- Scroll Saw Blades for Steel 1 2
  Started by: James A in: Workshop Tools and Tooling
- 15
- 33
- 17 October 2026 at 21:05
  bernard towers
- What Did You Do Today 2026 1 2 … 8 9
  Started by: JasonB in: The Tea Room
- 54
- 219
- 17 October 2026 at 19:31
  Mark Rand
- Model Turbines 1 2 … 26 27
  Started by: Turbine Guy in: Stationary engines
- 28
- 660
- 17 October 2026 at 19:22
  Turbine Guy
- Making a Lathe Bench for a Myford ML10
  Started by: starjump in: Beginners questions
- 10
- 25
- 17 October 2026 at 18:59
  starjump
- Rivetting with a hydraulic press
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 7
- 7
- 17 October 2026 at 18:58
  John Hinkley
- Bridge collapse 1 2
  Started by: JA in: The Tea Room
- 13
- 29
- 17 October 2026 at 18:21
  JA
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 336
- 17 October 2026 at 15:14
  Phil Whitley
- Old topics on this Forum
  Started by: JA in: Website Questions, Comments, and Suggestions
- 5
- 6
- 17 October 2026 at 14:40
  John Haine
- Lathe arriving – source some practice materials 1 2
  Started by: starjump in: Beginners questions
- 18
- 35
- 17 October 2026 at 10:24
  vic newey
- injector operation
  Started by: Garry Coles in: General Questions
- 6
- 10
- 17 October 2026 at 09:38
  MichaelR
- Steam Powered Lawn Mower!. 1 2
  Started by: Richard S2 in: Related Hobbies including Vehicle Restoration
- 13
- 37
- 16 October 2026 at 22:09
  Richard S2
- CAST IRON JOINING
  Started by: ian Holdsworth in: Beginners questions
- 11
- 17
- 16 October 2026 at 19:18
  JasonB
- Tom Senior small vertical head axial play
  Started by: chris1984 in: Manual machine tools
- 4
- 8
- 16 October 2026 at 19:07
  not done it yet
- Angled d-bit / machinist reamer? 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 12
- 27
- 16 October 2026 at 16:12
  Fulmen
- Myford ml7r
  Started by: lug lord in: Introduce Yourself – New members start here!
- 2
- 2
- 16 October 2026 at 12:04
  Bazyle
- Does anyone have any info about these vices 1 2
  Started by: bjcolyer in: Introduce Yourself – New members start here!
- 12
- 26
- 16 October 2026 at 10:20
  bjcolyer
- Picomite Version 7 – better than Arduino?
  Started by: IanT in: Electronics in the Workshop
- 8
- 21
- 16 October 2026 at 09:29
  IanT
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 25
- 15 October 2026 at 23:29
  Peter Hoerlein
- Lathe turning tool nomenclature
  Started by: JA in: Workshop Tools and Tooling
- 9
- 16
- 15 October 2026 at 19:48
  old mart
- Model Engineering Website
  Started by: Geoff Rogers in: General Questions
- 5
- 8
- 15 October 2026 at 16:14
  JA

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies