rotary table stops

[brickyParticipant @bricky]

Hi all

having seenJock Millers article on this subject in the latest MEW I asked a friend to roll me some bands as I wanted to make the stops to his design.An hour later I remembered that I had bought some Jubilee Clip banding and the screw adjusters.these will do the job and no need to get the bands of steel rolled,just tighten the threaded band in the right position.I will silver solder the stop to the band on the opposite side of the screw adjuster.Great idea Jock I am just coming up to some radius milling.

Frank.

[brickyParticipant @bricky]

[Author]

Posts