Is this any good to anyone.?

[Nick_GParticipant @nick_g]

.

Again a freebie but you will have to collect from Warrington.

This was a heated press that was used to heat seal laminates and photographs onto canvass.

It 'had' on it 2 nice plates of some kind of alloy measuring 27" x 22" x 1" and this is the reason I offered to scrap it and I have 'snaffled' these plates for moi.

(No idea what alloy they are but they are not magnetic and far too heavy for just plain ali.)

Anyway. The rest is up for grabs to anyone who may have a use for it. Either to make another press of some kind or to chop up and use.

It's probably now just scrap unless someone has a need / use for it.

Nick

[Nick_GParticipant @nick_g]

[Michael GilliganParticipant @michaelgilligan61133]

If only I had the room for it, Nick.

MichaelG.

[David Clark 13Participant @davidclark13]

It would make a good basis for an injection moulder.

[JasonBModerator @jasonb]

Or rivit squeezer

[John Stevenson 1Participant @johnstevenson1]

Should appeal to any Yorkshireman………………………………

[V8EngParticipant @v8eng]

Bit risky crossing the border, have to change the colour of the buttonhole rose.

Oops I forgot they moved Warrington into Cheshire!

Edited By V8Eng on 18/08/2015 13:57:49

My Yorkshire ancestors were not tight either.

Edited By V8Eng on 18/08/2015 14:04:01

[Nick_GParticipant @nick_g]

Posted by JasonB on 18/08/2015 13:15:53:

Or rivit squeezer

.

Pervert.!!!!

I knew I was right to have my doubts about you.!

Nick

[Author]

Posts