Minnie Traction Engine – Steam Block

Minnie Traction Engine – Steam Block

This topic has 3 replies, 2 voices, and was last updated 3 November 2018 at 14:07 by Malcolm Farrant.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
2 November 2018 at 15:56 #378819
Malcolm Farrant
Participant
@malcolmfarrant93389
I have at last completed, I think my boiler

Now moving forward I am confused by the Steam Block. The 7/32 front hole is for the connection for the Water Gauge.

That leaves a 5/32 and a 7/32 threaded female entry.. One of these is I presume for the Pressure Gauge (shown as being 3/8th Diameter. Which One ? and what is the other for.

Please could someone enlighten me
Advert

2 November 2018 at 15:56 #9394
Malcolm Farrant
Participant
@malcolmfarrant93389
2 November 2018 at 16:09 #378823
JasonB
Moderator
@jasonb
The other one is for putting a plug in as it is not used!

Top outlet for pressure gauge though my drawing shows it as 3/16 x 40 which takes short threaded nipple for a 3/32" pipe nut to go onto for the gauge pipework.
3 November 2018 at 14:07 #378972
Malcolm Farrant
Participant
@malcolmfarrant93389
Yet again, Thank you JasonB.

You are correct, The measurement is 3/16th x 40.

Would it be safe to put in a plug in the blank hole and then soft soldrf it ?

Regards

Malcolm
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- 3.5″ Derby 4F – First Loco Build
  Started by: mattleicester in: Locomotives
- 1
- 1
- 26 August 2025 at 13:18
  mattleicester
- Lathe tool inserts
  Started by: Andy Brocklehurst in: Beginners questions
- 6
- 11
- 26 August 2025 at 13:01
  Dalboy
- 3″ Castings – Help/Advice needed
  Started by: Andy Porter 1 in: Traction engines
- 5
- 11
- 26 August 2025 at 12:37
  parovoz
- Hereward
  Started by: Richard Simpson in: Model Boats
- 4
- 8
- 26 August 2025 at 12:27
  AStroud
- Softening epoxy 1 2
  Started by: John Haine in: General Questions
- 21
- 34
- 26 August 2025 at 11:20
  John Haine
- Myford VMB mill, head lift.
  Started by: lctikka61 in: Manual machine tools
- 2
- 2
- 26 August 2025 at 10:39
  John Haine
- QCTP for chester lathe 1 2
  Started by: Chris12 in: Beginners questions
- 11
- 27
- 26 August 2025 at 10:17
  dk0
- Granville lathe leadscrew change wheel
  Started by: JACK SIDEBOTHAM in: Help and Assistance! (Offered or Wanted)
- 11
- 18
- 26 August 2025 at 10:05
  Graham Flavell
- Valve gear problem
  Started by: John Billard 1 in: Locomotives
- 3
- 3
- 26 August 2025 at 09:08
  Charles Lamont
- Recommendations for book on clock repairs
  Started by: Andy Stopford in: Clocks and Scientific Instruments
- 8
- 10
- 25 August 2025 at 21:15
  Andy Stopford
- What Did You Do Today 2025 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 35
- 228
- 25 August 2025 at 17:30
  Roderick Jenkins
- Drain Cock search
  Started by: Speedy Builder5 in: Locomotives
- 4
- 8
- 25 August 2025 at 16:48
  Diogenes
- Bending copper tube?
  Started by: Bo’sun in: Workshop Techniques
- 11
- 14
- 25 August 2025 at 16:06
  Pete
- Blackgates 3 Way Toolpost Casting
  Started by: John McCulla in: Materials
- 15
- 25
- 25 August 2025 at 16:06
  Nicholas Farr
- Smart & Brown Model L lathe help required
  Started by: AJAX in: Manual machine tools
- 3
- 7
- 25 August 2025 at 15:14
  old mart
- Quartz clock movement
  Started by: duncan webster 1 in: Electronics in the Workshop
- 4
- 6
- 25 August 2025 at 10:24
  Michael Gilligan
- Milling for beginners book, Where?
  Started by: andy198712 in: Beginners questions
- 8
- 15
- 25 August 2025 at 09:16
  andy198712
- Museum donation
  Started by: Stephen Wessel 1 in: Introduce Yourself – New members start here!
- 3
- 3
- 25 August 2025 at 06:54
  Diogenes
- Phone Phreaking
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 11
- 15
- 24 August 2025 at 23:20
  Chris Crew
- THE MAUDSLAY TABELE ENGINE
  Started by: sivtek1 in: Stationary engines
- 4
- 7
- 24 August 2025 at 20:27
  Michael Gilligan
- Progress no.1 restoration
  Started by: flyingsailor in: Workshop Tools and Tooling
- 9
- 12
- 24 August 2025 at 19:52
  duncan webster 1
- A4 stainless
  Started by: David Ambrose in: Materials
- 14
- 22
- 24 August 2025 at 19:15
  old mart
- Joined 24 August 2025
  Started by: simon912 in: Introduce Yourself – New members start here!
- 3
- 3
- 24 August 2025 at 18:59
  noel shelley
- The stand alone weight for tower clock 1 2
  Started by: dk0 in: Clocks and Scientific Instruments
- 12
- 38
- 24 August 2025 at 18:33
  bernard towers
- Denford Orac refit
  Started by: Richard Evans 2 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 3
- 5
- 24 August 2025 at 16:59
  Richard Evans 2

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies