New member North Yorkshire

New member North Yorkshire

This topic has 5 replies, 5 voices, and was last updated 26 February 2026 at 19:38 by gwr45xx.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
22 February 2026 at 16:55 #838942
gwr45xx
Participant
@gwr45xx
Retired engineer from the nuclear power industry, looking to restart my interest in model engineering.

Some years ago when living in Scotland, I picked up a part completed GWR 45xx loco chassis in 71/4 gauge. This has been sat in my workshop for quite some time, crying out for attention every time I walk past it.

I am also a keen classic car enthusiast, and I am currently restoring a 1959 big Healy (BN6).

I have a well equipped workshop which has taken me over twenty years to accumulate a good selection of machine tools and tooling etc.
Advert

22 February 2026 at 19:30 #838974
John Hinkley
Participant
@johnhinkley26699
Welcome to the fray. You will find many like-minded folk on here, most willing to give opinions and/or advice on almost any subject. There’s also a similar number ready to tap into your knowledge base.

Have fun with the Healey!

John
22 February 2026 at 19:53 #838976
noel shelley
Participant
@noelshelley55608
Welcome, you’ll certainly be amongst friends here. Best wishes. Noel.
25 February 2026 at 12:20 #839278
Howard Lewis
Participant
@howardlewis46836
As the others say, Welcome to the Forum; a good place to exchange information and help

Howard
25 February 2026 at 14:31 #839303
Harry Wilkes
Participant
@harrywilkes58467
Welcome to the forum.

H
26 February 2026 at 19:38 #839518
gwr45xx
Participant
@gwr45xx
Thanks for your kind words

Best regards
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- 4 cylinder rotary valve
  Started by: AStroud in: Work In Progress and completed items
- 5
- 11
- 7 June 2026 at 00:02
  alecs
- Breaking gears in a Myford ML7
  Started by: drnewcomb in: Manual machine tools
- 10
- 12
- 7 June 2026 at 00:00
  alecs
- ChatGPT … getting close to passing the Turing Test 1 2
  Started by: Michael Gilligan in: The Tea Room
- 15
- 34
- 6 June 2026 at 23:18
  John Haine
- New to me Denbigh Power Hacksaw
  Started by: southernchap in: Manual machine tools
- 1
- 1
- 6 June 2026 at 23:17
  southernchap
- digital microscope for poor eyesight
  Started by: bernard towers in: Electronics in the Workshop
- 3
- 3
- 6 June 2026 at 23:11
  John Haine
- Taylor Hobson Pantograph Engraver Model D
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 7
- 18
- 6 June 2026 at 20:51
  Charles Jambon
- Cheap digital spirit level accuracy
  Started by: Mick Bailey in: Workshop Tools and Tooling
- 14
- 25
- 6 June 2026 at 18:47
  vintagengineer
- Table in the Mk1 Clarkson cutter grinder manual.
  Started by: Andrew Tinsley in: General Questions
- 3
- 6
- 6 June 2026 at 18:12
  Andrew Tinsley
- Band saw 1 2 3
  Started by: Peter Simpson 3 in: Beginners questions
- 23
- 70
- 6 June 2026 at 18:02
  Adam Harris
- Tapping Trick
  Started by: Steve Withnell in: Workshop Techniques
- 10
- 11
- 6 June 2026 at 17:43
  John Purdy
- Lightning
  Started by: duncan webster 1 in: Electronics in the Workshop
- 12
- 18
- 6 June 2026 at 17:41
  peter1972
- My week this week! My workshop videos 1 2 … 12 13
  Started by: Phil Whitley in: The Tea Room
- 16
- 321
- 6 June 2026 at 16:15
  Phil Whitley
- Replacement Allbrit Draftmaster Protractor Rulers
  Started by: wigan2026 in: Workshop Tools and Tooling
- 6
- 8
- 6 June 2026 at 13:43
  Grindstone Cowboy
- Warco GH600 Upgrades (DRO and Bed Protection)
  Started by: Richard Kirkman 1 in: Work In Progress and completed items
- 4
- 12
- 6 June 2026 at 12:41
  Richard Kirkman 1
- S,O,D
  Started by: larry phelan 1 in: The Tea Room
- 3
- 4
- 6 June 2026 at 09:34
  larry phelan 1
- where to find locomotive / train plans ?
  Started by: zuji miko in: Beginners questions
- 4
- 4
- 6 June 2026 at 09:21
  Nicholas Farr
- Price of A Mk2 Clarkson cutter grinder.
  Started by: Andrew Tinsley in: General Questions
- 5
- 5
- 6 June 2026 at 08:35
  Adrian R2
- Improving a 30 taper fit
  Started by: Andrew Skinner in: Manual machine tools
- 10
- 13
- 5 June 2026 at 19:31
  Howard Lewis
- Myford VMC Spindle Advice Please.
  Started by: Nigel Graham 2 in: Manual machine tools
- 7
- 12
- 5 June 2026 at 12:59
  Vic
- Richard B’s Minnie.
  Started by: Richard B in: Traction engines
- 4
- 20
- 4 June 2026 at 21:09
  Richard B
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 33
- 110
- 4 June 2026 at 19:59
  Nicholas Farr
- New member..
  Started by: wigan2026 in: Introduce Yourself – New members start here!
- 5
- 5
- 4 June 2026 at 16:19
  Harry Wilkes
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 56
- 4 June 2026 at 08:35
  alecs
- I wanted to learn 3D cad but couldn’t be bothered…
  Started by: wilson logan 1 in: CAD – Technical drawing & design
- 11
- 15
- 4 June 2026 at 07:12
  JasonB
- Starting to use Proxxon MF70
  Started by: barryblundell in: Workshop Tools and Tooling
- 8
- 25
- 3 June 2026 at 23:38
  Michael Gilligan

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

May 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies