Myford Super 7 Serial number

Myford Super 7 Serial number

This topic has 3 replies, 2 voices, and was last updated 14 September 2015 at 11:02 by Tom Davies 1.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
14 September 2015 at 10:40 #204198
Tom Davies 1
Participant
@tomdavies1
Hi

I have a Super 7 fitted with a gearbox which I have owned for about 20 years+ (I have lost the invoice). I had a reason to to determine which model I have and looked for the serial no (on the front lh side of the bed) there is nothing stamped on the bed in that area.

I have looked all over the lathe and cannot find one anywhere. What pointers are available to tell me what version of the lathe I have.

Thanks in advance

Regards

Tom
Advert

14 September 2015 at 10:40 #7796
Tom Davies 1
Participant
@tomdavies1
14 September 2015 at 10:52 #204199
Neil Wyatt
Moderator
@neilwyatt
Welcome Tom,

You should be able to figure it out from here: http://www.lathes.co.uk/myford/

If you can find the serial number "While late machines had their serial numbers stamped into the front of the bed, just to the right of the gap, earlier versions in a difficult-to-find location punched into the vertical way on the rear of the bed at its tailstock end" try here: http://www.lathes.co.uk/myford/page17.html or here: http://www.myford.co.uk/acatalog/Serial_Numbers.html

Neil
14 September 2015 at 11:02 #204200
Tom Davies 1
Participant
@tomdavies1
Thank you Neil

Found it – Made between 1968 and 1971.

Thanks again

Regards

Tom
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Sandvik Coromant 20mm hand-scraper
  Started by: flatline in: Workshop Tools and Tooling
- 6
- 12
- 21 May 2025 at 18:44
  Pete Rimmer
- Brian’s 1″ Minnie Traction Engine 1 2 … 13 14
  Started by: Brian Abbott in: Traction engines
- 38
- 338
- 21 May 2025 at 17:30
  Andy Stopford
- Tungsten Contact Points
  Started by: Durhambuilder in: I/C Engines
- 6
- 14
- 21 May 2025 at 17:09
  JasonB
- Stuart Twin Victoria (Princess Royal) Mill Engine 1 2 … 50 51
  Started by: Dr_GMJN in: Work In Progress and completed items
- 33
- 1,269
- 21 May 2025 at 15:53
  JasonB
- Building Bernard Tekippe’s Precision Regulator 1 2 3 4
  Started by: Chris Raynerd 2 in: Clocks and Scientific Instruments
- 14
- 94
- 21 May 2025 at 15:40
  Dave S
- New Warco D330 – Some Advice Please
  Started by: Mark Slatter in: Manual machine tools
- 13
- 17
- 21 May 2025 at 15:01
  KEITH BEAUMONT
- Suitable fuel for boll aero engine
  Started by: half whit in: I/C Engines
- 7
- 12
- 21 May 2025 at 14:55
  KEITH BEAUMONT
- Aliphatic glue removal/separation
  Started by: Mike Joseph in: Model Boats
- 3
- 3
- 21 May 2025 at 14:09
  Colin Bishop
- Colchester Chipmaster Clutch question
  Started by: Peter_H in: Manual machine tools
- 1
- 1
- 21 May 2025 at 14:01
  Peter_H
- Not unexpected, but is it predictable ? 1 2
  Started by: Michael Gilligan in: 3D Printers and 3D Printing
- 9
- 32
- 21 May 2025 at 13:59
  Andrew Entwistle
- Is content in ME&W being written by AI?
  Started by: norm norton in: Model Engineer & Workshop
- 2
- 2
- 21 May 2025 at 13:38
  JasonB
- CNC Coolant
  Started by: Steve355 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 8
- 25
- 21 May 2025 at 13:24
  JasonB
- Help and advice please
  Started by: acklam65 in: Beginners questions
- 5
- 8
- 21 May 2025 at 11:31
  Nicholas Farr
- Printed ME&W not arriving (overseas).
  Started by: michael rietveld in: Model Engineer & Workshop
- 3
- 3
- 21 May 2025 at 10:23
  simondavies3
- What Did You Do Today 2025 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 28
- 116
- 21 May 2025 at 10:14
  Bazyle
- Clockmakers Depthing Tool
  Started by: David Carne in: Clocks and Scientific Instruments
- 10
- 15
- 21 May 2025 at 10:04
  Matt Harrington
- ML7 Topslide limitations 1 2
  Started by: Mike Poole in: Manual machine tools
- 14
- 27
- 20 May 2025 at 22:58
  Michael Gilligan
- making a 3″ saw-blade clamping washer with a tapered thickness
  Started by: milesincam in: Workshop Tools and Tooling
- 11
- 19
- 20 May 2025 at 22:34
  John Haine
- Not another one
  Started by: Dell in: Manual machine tools
- 2
- 2
- 20 May 2025 at 21:57
  Michael Gilligan
- Countersinking carbon fibre sheet with my Sieg CNC Mill
  Started by: Sarah F in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 7
- 17
- 20 May 2025 at 20:44
  Neil Lickfold
- The June copy of ME&W has not arrived.
  Started by: Andrew Tinsley in: General Questions
- 2
- 3
- 20 May 2025 at 18:58
  Andrew Tinsley
- Boxford Cud or ML7
  Started by: Trevor Howley in: General Questions
- 14
- 21
- 20 May 2025 at 18:05
  Bazyle
- Motorised Adept No. 2 Shaper
  Started by: William Ayerst in: Workshop Tools and Tooling
- 6
- 11
- 20 May 2025 at 10:47
  William Ayerst
- Intro – a Cambridge hobbyist
  Started by: milesincam in: Introduce Yourself – New members start here!
- 9
- 15
- 20 May 2025 at 10:05
  Julie Ann
- What is Hobbymat MD65 RAL colour?
  Started by: stew 1 in: Workshop Tools and Tooling
- 5
- 7
- 20 May 2025 at 09:59
  stew 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

June 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies