Lathe reviews?

This topic has 15 replies, 9 voices, and was last updated 28 November 2012 at 22:14 by Andyf.

Viewing 16 posts - 1 through 16 (of 16 total)

Author

Posts
24 November 2012 at 17:10 #104536
Graham Rounce
Participant
@grahamrounce14492
I know I can hunt around, but are there any sites that deal with reviews of metalworking lathes?

Something like this

http://www.ukworkshop.co.uk/forums/buying-advice-tool-reviews.html

only for metalwork?

Thanks again,
Advert

24 November 2012 at 17:10 #6455
Graham Rounce
Participant
@grahamrounce14492
24 November 2012 at 19:18 #104546
David Littlewood
Participant
@davidlittlewood51847
Graham,

Have a look at **LINK**

Should cover most machines.

David
24 November 2012 at 19:58 #104548
Graham Rounce
Participant
@grahamrounce14492
Hi David, and thanks – that’s a fantastic resource. But I was thinking more of user reviews (of current machines)?
25 November 2012 at 18:01 #104616
Derek Drover
Participant
@derekdrover32802
Best thing.. if you have a lathe in particular you want info on from actual users, look at previous threads or post the question.
25 November 2012 at 18:03 #104617
chris j
Participant
@chrisj
Posted by David Littlewood on 24/11/2012 19:18:34:

Graham,

Have a look at **LINK**

Should cover most machines.

David

No Warco lathes on that site (that I could find) sadly.
25 November 2012 at 18:14 #104618
Graham Rounce
Participant
@grahamrounce14492
Hi – Ok! Anyone got any experience of the Warco Super Mini to pass on?
And PS, just to show off my ignorance, I think ‘Maximum swing’ (180mm) is the max diameter workpiece it will turn, but what is ‘Swing over cross slide’ (100mm)? Is it the maximum cuttable diameter?
25 November 2012 at 18:25 #104623
graham howe
Participant
@grahamhowe83128
Hi, I can offer a review of my BH600G lathe from Warco which was also reviewed bu Anthony Mount in the ME 2003/4.

http://www.homepages.mcb.net/howe/bh600%20article.htm

Graham
25 November 2012 at 18:59 #104628
KWIL
Participant
@kwil
Graham, your surmise is correct., obviously the cross slide height limits the maximum diameter of anything projecting towards the tailstock which actually passes over the cross slide. If it does not need to pass over then you can turn, say a wheel or flywheel up to the maximum swing.
26 November 2012 at 22:55 #104762
Bazyle
Participant
@bazyle
You could try searching the me & mew index for the lathe you are interested in and some similar names especially when it is sold by several vendors in virtually the same form.

I have often thought ME should do a quality in depth review of every major new lathe with systematic cross references to the similar ones as they come along and with detail about their rebadging and manufacturer. Not so much for today but for 50 years hence when their origins are long forgotten. Just look at all those 'what is this' queries on this forum and unknown lathes on ebay. It should be possible to find the details in past mags.
26 November 2012 at 22:58 #104763
KWIL
Participant
@kwil
Bazyle, you must remember ME does not do anything, it relies and has always relied upon material being submitted. They are not staffed for writing only editing.
27 November 2012 at 19:33 #104842
Bazyle
Participant
@bazyle
good point. they could solicit input from the mfr / importer and edit out the blatent advertising. Otherwise it could be a way for a new purchaser to earn a few bob back. I wonder if they want a review of an MT3 drill chuck
27 November 2012 at 21:12 #104854
Sub Mandrel
Participant
@submandrel
Why don't we start the ball rolling by posting threads in the workshop tooling topic? A few photos, how long you have had the machine, strengths and weaknesses and any modifications (both essential or convenient).

Similar machines (e.g. the various versions of mini-lathe could all share the same thread).

Neil

Edited By Stub Mandrel on 27/11/2012 21:13:58
27 November 2012 at 21:16 #104855
chris j
Participant
@chrisj
Posted by Stub Mandrel on 27/11/2012 21:12:43:

Why don't we start the ball rolling by posting threads in the workshop tooling topic? A few photos, how long you have had the machine, strengths and weaknesses and any modifications (both essential or convenient).

Similar machines (e.g. the various versions of mini-lathe could all share the same thread).

Neil

Edited By Stub Mandrel on 27/11/2012 21:13:58

Neil, you're alive
28 November 2012 at 20:13 #104942
Sub Mandrel
Participant
@submandrel
I've even got dry feet now

Neil
28 November 2012 at 22:14 #104960
Andyf
Participant
@andyf
Graham, if it's of any help, I have a small Warco lathe, and did a sort of review here on my website.

Andy
Author

Posts